基于三維的蓋板復合模的設計與裝配【說明書+CAD+PROE】

基于三維的蓋板復合模的設計與裝配【說明書+CAD+PROE】,說明書+CAD+PROE,基于三維的蓋板復合模的設計與裝配【說明書+CAD+PROE】,基于,三維,蓋板,復合,設計,裝配,說明書,仿單,cad,proe 基于三維的蓋板復合模的設計與裝配 摘要：復合模結構緊湊，生產效率高，工件精度高，適用于大批量生產。在壓力機的一次行程中，復合模同時完成落料與沖孔等多個工序。復合模結構上有一個既為落料凸模又為沖孔凹模的凸凹模。本次設計課題為中速發動機體蓋板復合模設計。整個設計系統地對工件的工藝性及模具結構進行了分析設計。整個沖裁工序包括一個落料工序和一個沖孔工序，為提高生產效率，降低成本選用倒裝復合沖裁模，壓力機則據沖裁力選用公稱壓力為600KN的開式可傾壓力機。板料選用3mm厚的B3薄鋼板，采用有廢料排樣法，材料利用率為87%。沖裁間隙確定為0.500mm。模具整體設計及零部件設計均參考有關資料進行標準設計。 關鍵詞：復合模 凸凹模 沖孔 落料 Based on PRO / E Flat parameters of the compound die design and assembly Abstract：The superposable die structure is compact, the production efficiency is high, the work piece precision is high, is suitable for the production in enormous quantities. In a press's traveling schedule, the superposable die simultaneously completes falls the material and the punch holes and so on many working procedures. In the superposable die structure has one both to fall the material plunger and for the punch holes lower die raised lower die. This subject is the compound pattern designing for the blind flange of the medial speed engine body. The whole blanking process includes one punching process and one blanking process. In order to raise production efficiency and to reduce the cost of production,we choose the inverting compound blanking die, and according to blanking pressure,we choose the opening inclined press which the nominal pressure is 600KN. The board material is selected the thin steel plate of B3 metal that 3mm thick, and we adopt wasting material stocking layout method, and the material utilization ratio is 87%. The blanking clearance is defined 0.500mm. The whole die design and parts design are all consulted concerned material and are carried on the standard design. Key words: compound pattern punch blank