錘式破碎機的設計【含4張CAD圖紙+文檔】
錘式破碎機的設計【含4張CAD圖紙+文檔】,含4張CAD圖紙+文檔,破碎,設計,cad,圖紙,文檔
錘式破碎機的設計
摘要
錘式破碎機大量應用于水泥廠、電廠等各個部門，所以，它的設計有著廣泛的前景和豐富的可借鑒的經驗。其設計的實質是，在完成總體的設計方案以后，就指各個主要零部件的設計、安裝、定位等問題，并對個別零件進行強度校核和試驗。并在相關專題中，對錘頭的壽命延長進行比較詳細的分析。在各個零部件的設計中，要包括材料的選擇、尺寸的確定、加工的要求，結構工藝性的滿足，以及與其他零件的配合的要求等。在強度的校核是，要運用的相關公式，進行危險部位的分析、查表、作圖和計算等。并隨后對整體進行安裝、工作過程以及工作后的各方面的檢查，同時兼顧到維修、保險裝置等方面的問題，最后對兩個主要工作零件的加工精度、公差選擇進行分析，以保證破碎機最終設計的經濟性和可靠性。
關鍵詞：錘式破碎機；錘頭；強度；公差
The Design Of the Hammer Crusher
Abstract
Hammer type breakers are applied to such each department as the cement plant, power plant, etc. in a large amount, so its design has an extensive prospect and experience that can be used for reference. Its design essence is, formerly after total conceptual design, a design which points each main spare part, question of installing and making a reservation etc., and carry on the intensity to check and test to the specific part, and in relevant thematic parts, analysis of comparing question that the life-span of very beginning of the hammer lengthens in detail. In the design of each spare part, should include the choice, sureness, demand processed, structure craft satisfication of the size of the material, and the demand for cooperating with other parts, etc.. When the intensity is checked, should use relevant formulae, carry on the analysis of the dangerous position, need to check form, mapping, calculation, etc.. Then to install , work course , work situation after predict that carries on more overall inspection whole, give consideration to the question in such respects as maintaining and safety ,etc. at the same time. Finally, choose to analyse in machining accuracy, public errand to two groundwork parts, economy and dependability that the breaker soed as to ensure is designed finally.
Keywords: Hammer type breakers, hammer, intensity, tolerance
不要?jiǎng)h除行尾的分節符，此行不會被打印
- 4 -
目錄
摘要 I
Abstract II
第1章 緒論 1
1.1 課題背景 1
1.2 選題分析 1
1.3 國內外現狀 1
1.3.1 國內發展情況 1
1.3.2 國外發展情況 2
第2章 原理及其設計方案的確定 3
2.1 破碎機的結構及原理 3
2.1.1 破碎原理 3
2.1.2 破碎機的主要結構 3
2.2 設計方案 4
2.3 本章小結 4
第3章 錘式破碎機的電動機功率的計算和選擇 5
3.1破碎機電動機功率的計算 5
3.1.1 綜合各種因素計算功率 5
3.1.2 根據生產實踐以及引用經驗公式計算電動機功率 6
3.2 電動機型號的選擇 7
3.3 本章小結 7
第4章 錘式破碎機的主要機構參數的 8
4.1 轉子部分結構 8
4.2轉子轉速的確定 8
4.3轉子軸的設計 9
4.3.1轉子軸尺寸設計 9
4.3.2轉子軸的校核 11
4.4錘頭參數的設計 12
4.4.1錘頭質量確定的理論分析 12
4.4.2錘頭質量參數的確定 14
4.5帶傳動部分的設計 16
4.5.1 設計步驟和方法 16
4.5.2 帶輪的設計 18
4.6圓盤的設計 19
4.7角接觸球軸承的選擇及校核 20
4.8鍵的選擇及校核 20
4.8.1轉子上鍵的校核 21
4.8.2皮帶輪上鍵的校核 21
4.9本章小結 21
第5章 電渦流傳感器的選擇、功能原理及其結構 23
5.1選擇電渦流傳感器 23
5.2電渦流傳感器工作的原理 23
5.3電渦流傳感器結構 25
5.3.1探頭結構 25
5.3.2延伸電纜 25
5.4本章小結 26
結論 27
致謝 28
參考文獻 29
附錄 30
收藏