喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
沈陽工業大學畢業設計（論文） 摘要
加工中心側銑頭結構設計
摘要 本設計主要是根據設計要求，依據機械設計和機械制圖的基本原理對一臺重型數控龍門銑床的側銑頭進行結構設計，該側銑頭能夠在X 方向和Z方向兩個方向上進行銑削運動。本設計主要分四部分：
第一部分是根據設計要求對側銑頭的結構進行總體方案的設計，主要包括伺服進給運動和主運動方式的確定。
第二部分是利用機械設計基本原理對設計中伺服進給運動和主運動系統的機械部分的設計計算，主要包括進給電動機、主軸電動機、滾珠絲杠副的選則、計算和校核以及對同步帶和帶輪進行設計。
第三部分是根據所選擇設計的主要零件，先進行大體結構設計，之后在此基礎之上，利用機械制圖的基本原理，應用CAXA電子圖版對側銑頭的結構進行二維設計，并生成三張二維裝配圖紙和一張二維零件圖紙。
最后一部分是依據所設計的二維圖，利用SOLIDWORKS軟件對側銑頭結構中零件進行三維建模，并將所有建模零件進行裝配，生成三維裝配體；在此基礎上，利用該軟件做一個三維動畫，顯示裝配體內部結構及運動方式。
關鍵字： 重型數控龍門銑床 側銑頭 結構設計 總體方案設計
二維設計 三維建模 三維動畫
Structural Design of the Profile Cutter Head of
a Machining Centre
Abstract: The design is mainly to design the profile cutter head structural of a heavy numerically controlled plan miller according as the rationale of mechanism design and theory of machines on the bases of design specification. The design is mainly divided into four parts:
The first part is a content of total project design of the profile cutter head Structure according as design specification, including confirming the manner of servo feed motion and the main motion.
The second part is design of calculations of machine parts of servo feed motion system and the main motion system according as the rationale of mechanism design. Its mainly including chooses the type, the calculation and the verification of the feed electromotor, the principal axis electromotor and the ball screw, and the design of hold-in range and synchronous pulley.
The third part is to design the mainly structure firstly on the bases of main parts choosed and designed in the second part, then to design two dimensional drawings, and create three assembly drawings and one detail drawings using CAXA software according to the rationale of theory of machines.
The finally part is to model the parts of the profile cutter head, and create three dimensional drawings using SOLIDWORKS software according to two dimensional drawings designed in the third part；The following is to create a three-dimensional animation to show the inside structure of the three-dimensional assembly drawing and the motion manner using the software on the bases of the three-dimensional assembly drawing.
Keywords: Heavy numerically controlled plan miller, The profile cutter head, Structural design, total project design, two dimensional design, three dimensional modeling，three-dimensional animation。
I
沈陽工業大學畢業設計（論文） 目錄
目 錄
摘 要………………………………………………………………………………………I
ABSTRACT……………………………………………………………………………П
第一章 緒 論…………………………………………………………………………1
1.1 國內外數控機床的發展?fàn)顩r……………………………………………………1
1.2 數控技術的發展趨勢……………………………………………………………2
1.3 設計目的和意義……………………………………………………………………3
第二章 總體方案設計……………………………………………………………5
2.1設計基本要求………………………………………………………………………5
2.2總體設計方案………………………………………………………………………6
第三章 伺服系統機械部分設計計算………………………………………8
3.1滾珠絲杠副的選擇計算…………………………………………………………8
3.1.1 已知參數…………………………………………………………………………8
3.1.2 切削力的確定…………………………………………………………………8
3.1.3 滾珠絲扛螺母副的設計、計算………………………………………………8
3.2 進給伺服系統傳動計算…………………………………………………………11
3.2.1 電動機選擇……………………………………………………………………11
3.2.2 同步帶的設計計算……………………………………………………………17
3.3 機床主軸部分設計計算…………………………………………………………18
3.3.1 主軸電機及其減速器的選擇計算…………………………………………18
3.3.2 同步帶的設計計算……………………………………………………………19
第四章 二維設計 …………………………………………………………………21
4.1 大體結構設計………………………………………………………………………21
4.2 利用 CAXA 電子圖版進行二維設計…………………………………………22
第五章 三維設計…………………………………………………………………27
5.1 Solidworks2005軟件介紹……………………………………………………27
5.2 三維建?！?8
5.3 三維動畫…………………………………………………………………………34
經濟技術性與環保分析……………………………………………………………35
結 論………………………………………………………………………………………36
致 謝………………………………………………………………………………………37
參考文獻…………………………………………………………………………………38
外文翻譯…………………………………………………………………………………39