全自動貼標機設計-全自動單標直線貼標機總體設計

喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，有疑問咨詢QQ:414951605 或 1304139763 摘 要 本次設計課題為“全自動單標直線貼標機總體設計”。據統計全世界用于灌裝的各種容器已經多達3030億個，而其中71%是玻璃瓶。我國是世界上玻璃瓶使用比例最多的國家，占全球總量的55%以上。再加之近年來我國釀造技術的不斷發展，傳統的人工貼標簽的方式必將不能滿足需要，所以近些年來，國內眾多廠家積極引進國外成套釀造生產設備和先進技術，使我國全自動貼標機有了很大的發展空間。 設計此食用油瓶貼標機，要求在滿足自動分瓶、送標帶、同步分離標簽，標貼情況下，使貼標準確、穩定、可靠、高效。 其中著重針對于單標真空轉鼓式直線貼標機的結構及貼標方式進行改進、分析與設計，并對其主要傳動部分進行方案設計及強度校核。了解和掌握全自動單標直線貼標機在實際使用過程中出現的問題，在進行理論分析和計算的基礎上，對全自動單標直線貼標機供標裝置涂膠裝置進行改進，并對其貼標精度不足的問題提出具體可行的解決方案。通過整個總體設計，我熟練的使用CAD,Solidworks等繪圖軟件設計分析，優化設計參數，縮短設計時間，對總體設計的整體構思有了更為深刻全面的了解。關鍵詞：直線貼標機， 真空轉鼓，貼標方式，涂膠裝置3AbstractThis design topic is “Automatic straight line labeling machine for single labeloverall design”. Mainly of single label drum vacuum line labeler to the structure and labeling methods to improve the analysis and design, and transmission parts of the main program design and strength check. Understanding and knowledge of standard single-line automatic labeling machines actually used in the course of problems in theoretical analysis The important position of the wheel gear and shaft cant falter in traditional machine and modern machinesThe passing to process to make them can is divided into many model numbers, useding for many situations respectively.So we must be the multilayers to the understanding of the wheel gear and shaft in many ways , and calculated based on the standard single-line automatic labeling machines for the standard device to improve the labeling system, and gelatinize fixture of its lack of specific and feasible solutions. Through the whole design process,the design for analysis software including CAD,Solidworks and so on,Usething these soft wares optimizes the parameters cutsdown the design time and makes the process efficient.I learned the more knowledge of the whole design. Key words：labeling machine,drum vacuum,labeling system, gelatinize fixture本科畢業設計說明書（論文）目 錄摘 要I1 概述11.1簡介11.2國內及國外包裝機械現狀及發展趨勢12 設計任務的分析52.1 設計任務的提出52.2 設計任務的可行性分析73 總體設計93.1工藝分析93.2 總體布局93.3各主要部分設計103.4電動機與傳動系統123.5帶傳動設計計算153.6齒輪材料選擇及熱處理174 使用及維修214.1 安全技術操作規程（工作準備）214.2操作基本技術要求214.3常見的貼標機故障及排除21結 論23致 謝24參考文獻25附 錄26