food control 格式要求

《food control 格式要求》由會員分享，可在線閱讀，更多相關(guān)《food control 格式要求（12頁珍藏版）》請?jiān)谘b配圖網(wǎng)上搜索。

1、-Food Control is an international journal that provides essential information for those involved in foodsafety and process control.Food Control covers: Microbial food safety and antimicrobial systems Mycoto*ins Hazard analysis, HACCP and food safety objectives Risk assessment, including microbial ri

2、sk assessment Quality assurance and control Good manufacturing practices Food process systems design and control Food Packaging Rapid methods of analysis and detection, including sensor technology Environmental control and safety Codes of practice, legislation and international harmonization Consume

3、r issues Education, training and research needs.The scope of Food Control is prehensive and includes original research papers, authoritativereviews, short munications, ment articles that report on new developments in food control,and position papers.The work described should be innovative either in

4、the approach or in the methods used. Thesignificance of the results either for the science munity or for the food industry must also bespecified. Contributions that do not fulfil these requirements will not be considered for review andpublication.AUDIENCE.All managers, scientists, technologists, and

5、 legislators working in the food industry todayIMPACT FACTOR.2009: 2.463 Thomson Reuters Journal Citation Reports 2010IMPACT FACTOR.2009: 2.463 Thomson Reuters Journal Citation Reports 2010EDITORIAL BOARD.Editor-in-ChiefG. Campbell-Platt, University of Reading, Reading, UK, Email: geoffreycampbell-p

6、latt.co.ukNorth American EditorJ.J. Jen, California Polytechnic State University, San Luis Obispo, CA, USA, Email: forthamerica.Editorial Board MembersL. Anelich, Anelich Consulting, Pretoria, South AfricaD.L. Archer, University of Florida, Gainesville, FL, USAF. Busta, University of Minnesota, St.

7、Paul, MN, USAA.A.G. Candlish, Glasgow Caledonian University, Glasgow, UKJ. Chirife, Facultad de Ciencias Agrarias, Buenos Aires, ArgentinaG.W. Gould, Bedford, England, UKR. Greiner, Ma* Rubner-Institut (MRI), Karlsruhe, GermanyB. Jarvis, Ross Biosciences Ltd, Ross-on-Wye, UKD.J. Jukes, University of

8、 Reading, Reading, UKC-H. Lee, Korea University, Seoul, South KoreaF-K. Lcke, Fulda University of Applied Science, Fulda, GermanyF. Meuser, Technische Universitt Berlin (TUB), Berlin, GermanyS. Mortimore, General Mills Europe, St. Paul, MN, USAY. Motarjemi, Nestl Research Center, Vevey, SwitzerlandG

9、. Moy, World Health Organization, Genve, SwitzerlandA. Pisula, Warsaw Agricultural University (S.G.G.W.), Warsaw, PolandW.A. Plahar, CSIR Food Research Institute, Accra, GhanaP. Rao, Fuzhou University, Fuzhou, Fujian, ChinaG.L. Robertson, University of Queensland, Brisbane, QLD, AustraliaW.E.L. Spie

10、, Ma*-Rubner-Institut; Federal Institute for Nutrition, Karlsruhe, GermanyG. Trystram, AgroParisTech, Massy Cede*, FranceP. Wall, University College Dublin, Dublin, IrelandR.J. Winger, Massey University, Albany, New ZealandC. Zaror, Universidad de Concepcin, Concepcion, ChileGUIDE FOR AUTHORS.INTROD

11、UCTIONFood Control is an international journal that provides essential information for those involved in foodsafety and process control.Food Control covers:Microbial food safety and antimicrobial systems Mycoto*ins Hazard analysis, HACCP and food safetyobjectives Risk assessment, including microbial

12、 risk assessment Quality assurance and control Goodmanufacturing practices Food process systems design and control Food Packaging Rapid methodsof analysis and detection, including sensor technology Environmental control and safety Codesof practice, legislation and international harmonization Consume

13、r issues Education, training andresearch needs.The scope of Food Control is prehensive and includes original research papers, authoritativereviews, short munications, ment articles that report on new developments in food control,and position papers.The work described should be innovative either in t

14、he approach or in the methods used. Thesignificance of the results either for the science munity or for the food industry must also bespecified. Contributions that do not fulfil these requirements will not be considered for review andpublication.Types of paperOriginal high-quality research papers (p

15、referably no more than 7000 words, including tables andillustrations). Major review articles, up to 10,000 words Short munications of up to 3000 words,describing work that may be of a preliminary nature but which merits immediate publication.Short reviews on topical subjects, up to 6000 words. ment

16、articles not e*ceeding 2000 words.Authoritative position papers from e*pert groups are also wele.Food Control also publishes book reviews, Letters to the Editor, conference reports and a calendarof forthing events.The Editor-in-Chief has the right to decline formal review of a manuscript when it is

17、deemed that themanuscript is 1) on a topic outside the scope of the Journal; 2) lacking technical merit; 3) of insufficientnovelty for a wide international readership; 4) fragmentary and providing marginally incrementalresults; or 5) is poorly written.All contributions deemed suitable for review are

18、 read by two or more referees to ensure both accuracyand relevance, and revisions to the script may thus be required. On acceptance, contributions aresubject to editorial amendment to suit house style. When a manuscript is returned for revision priorto final acceptance, the revised version must be s

19、ubmitted as soon as possible after the authorsreceipt of the referees reports. Revised manuscripts returned after four months will be consideredas new submissions subject to full re-review.Contact details for submissionSubmission to this journal proceeds totally online. Use the following guidelines

20、to prepare your article.Via the homepage of this journal ees.elsevier./foodcont you will be guided stepwise throughthe creation and uploading of the various files.Page chargesThis journal has no page charges.BEFORE YOU BEGINEthics in PublishingFor information on Ethics in Publishing and Ethical guid

21、elines for journal publication see.elsevier./publishingethics and .elsevier./ethicalguidelinesConflict of interestAll authors are requested to disclose any actual or potential conflict of interest including any financial,personal or other relationships with other people or organizations within three

22、 years of beginning thesubmitted work that could inappropriately influence, or be perceived to influence, their work. Seealso .elsevier./conflictsofinterest.Submission declaration and verificationSubmission of an article implies that the work described has not been published previously (e*ceptin the

23、 form of an abstract or as part of a published lecture or academic thesis), that it is notunder consideration for publication elsewhere, that its publication is approved by all authors andtacitly or e*plicitly by the responsible authorities where the work was carried out, and that,if accepted, it wi

24、ll not be published elsewhere in the same form, in English or in any otherlanguage, including electronically without the written consent of the copyright-holder. To verifyoriginality, your article may be checked by the originality detection software iThenticate. See also.elsevier./editors/plagdetect

25、.Changes to authorshipThis policy concerns the addition, deletion, or rearrangement of author names in the authorship ofaccepted manuscripts:Before the accepted manuscript is published in an online issue: Requests to add or remove an author,or to rearrange the author names, must be sent to the Journ

26、al Manager from the corresponding authorof the accepted manuscript and must include: (a) the reason the name should be added or removed,or the author names rearranged and (b) written confirmation (, fa*, letter) from all authors thatthey agree with the addition, removal or rearrangement. In the case

27、 of addition or removal of authors,this includes confirmation from the author being added or removed. Requests that are not sent bythe corresponding author will be forwarded by the Journal Manager to the corresponding author, whomust follow the procedure as described above. Note that: (1) Journal Ma

28、nagers will inform the JournalEditors of any such requests and (2) publication of the accepted manuscript in an online issue issuspended until authorship has been agreed.After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrangeauthor names in an article

29、 published in an online issue will follow the same policies as noted aboveand result in a corrigendum.CopyrightUpon acceptance of an article, authors will be asked to plete a Journal Publishing Agreement (formore information on this and copyright see .elsevier./copyright). Acceptance of theagreement

30、 will ensure the widest possible dissemination of information. An will be sent tothe corresponding author confirming receipt of the manuscript together with a Journal PublishingAgreement form or a link to the online version of this agreement.Subscribers may reproduce tables of contents or prepare li

31、sts of articles including abstracts for internalcirculation within their institutions. Permission of the Publisher is required for resale or distributionoutside the institution and for all other derivative works, including pilations and translations(please consult .elsevier./permissions). If e*cerpt

32、s from other copyrighted works areincluded, the author(s) must obtain written permission from the copyright owners and credit thesource(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult.elsevier./permissions.Retained author rightsAs an author you (or

33、your employer or institution) retain certain rights; for details you are referredto: .elsevier./authorsrights.Role of the funding sourceYou are requested to identify who provided financial support for the conduct of the research and/orpreparation of the article and to briefly describe the role of th

34、e sponsor(s), if any, in study design; inthe collection, analysis and interpretation of data; in the writing of the report; and in the decision tosubmit the paper for publication. If the funding source(s) had no such involvement then this shouldbe stated. Please see .elsevier./funding.Funding body a

35、greements and policiesElsevier has established agreements and developed policies to allow authors whose articles appear injournals published by Elsevier, to ply with potential manuscript archiving requirements as specifiedas conditions of their grant awards. To learn more about e*isting agreements a

36、nd policies please visit.elsevier./fundingbodiesOpen accessThis journal offers you the option of making your article freely available to all via the ScienceDirectplatform. To prevent any conflict of interest, you can only make this choice after receiving notificationthat your article has been accept

37、ed for publication. The fee of $3,000 e*cludes ta*es and otherpotential author fees such as color charges. In some cases, institutions and funding bodies haveentered into agreement with Elsevier to meet these fees on behalf of their authors. Details of theseagreements are available at .elsevier./fun

38、dingbodies. Authors of accepted articles,who wish to take advantage of this option, should plete and submit the order form (available at.elsevier./locate/openaccessform.pdf). Whatever access option you choose, you retainmany rights as an author, including the right to post a revised personal version

39、 of your article on yourown website. More information can be found here: .elsevier./authorsrights .Language and language servicesPlease write your te*t in good English (American or British usage is accepted, but not a mi*ture ofthese). Authors who require information about language editing and copye

40、diting services pre- andpost-submission please visit webshop.elsevier./languageediting or our customer supportsite at support.elsevier. for more information.SubmissionSubmission to this journal proceeds totally online and you will be guided stepwise through the creationand uploading of your files. T

41、he system automatically converts source files to a single PDF file of thearticle, which is used in the peer-review process. Please note that even though manuscript sourcefiles are converted to PDF files at submission for the review process, these source files are needed forfurther processing after a

42、cceptance. All correspondence, including notification of the Editors decisionand requests for revision, takes place by removing the need for a paper trail.Authors must provide and use an email address unique to themselves and not shared with anotherauthor registered in EES, or a department.RefereesP

43、lease submit, with the manuscript, the names, addresses and addresses of 3 potentialreferees. Note that the editor retains the sole right to decide whether or not the suggested reviewersare used.PREPARATIONUse of wordprocessing softwareIt is important that the file be saved in the native format of t

44、he wordprocessor used. The te*t shouldbe in single-column format. Keep the layout of the te*t as simple as possible. Most formatting codeswill be removed and replaced on processing the article. In particular, do not use the wordprocessorsoptions to justify te*t or to hyphenate words. However, do use

45、 bold face, italics, subscripts,superscripts etc. When preparing tables, if you are using a table grid, use only one grid for eachindividual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns.The electronic te*t should be prepared in a way very similar to t

46、hat of conventional manuscripts(see also the Guide to Publishing with Elsevier: .elsevier./guidepublication). Note thatsource files of figures, tables and te*t graphics will be required whether or not you embed your figuresin the te*t. See also the section on Electronic illustrations.To avoid unnece

47、ssary errors you are strongly advised to use the spell-check and grammar-checkfunctions of your wordprocessor.Every page of the manuscript should be numbered. Lines must be numbered consecutively throughoutthe manuscript, not per page.Article structureSubdivision - numbered sectionsDivide your artic

48、le into clearly defined and numbered sections. Subsections should be numbered1.1 (then 1.1.1, 1.1.2, .), 1.2, etc. (the abstract is not included in section numbering). Use thisnumbering also for internal cross-referencing: do not just refer to the te*t. Any subsection may begiven a brief heading. Ea

49、ch heading should appear on its own separate line.IntroductionState the objectives of the work and provide an adequate background, avoiding a detailed literaturesurvey or a summary of the results.Material and methodsProvide sufficient detail to allow the work to be reproduced. Methods already publis

50、hed should beindicated by a reference: only relevant modifications should be described.Theory/calculationA Theory section should e*tend, not repeat, the background to the article already dealt with in theIntroduction and lay the foundation for further work. In contrast, a Calculation section represe

51、nts apractical development from a theoretical basis.ResultsResults should be clear and concise.DiscussionThis should e*plore the significance of the results of the work, not repeat them. A bined Resultsand Discussion section is often appropriate. Avoid e*tensive citations and discussion of published

52、literature.ConclusionsThe main conclusions of the study may be presented in a short Conclusions section, which may standalone or form a subsection of a Discussion or Results and Discussion section.AppendicesIf there is more than one appendi*, they should be identified as A, B, etc. Formulae and equa

53、tions inappendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendi*,Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.Essential title page information Title. Concise and informative. Titles are often used in information-retrieval

54、systems. Avoidabbreviations and formulae where possible. Author names and affiliations. Where the family name may be ambiguous (e.g., a doublename), please indicate this clearly. Present the authors affiliation addresses (where the actual workwas done) below the names. Indicate all affiliations with

55、 a lower-case superscript letter immediatelyafter the authors name and in front of the appropriate address. Provide the full postal address ofeach affiliation, including the country name, and, if available, the address of each author. Corresponding author. Clearly indicate who will handle correspond

56、ence at all stages of refereeingand publication, also post-publication. Ensure that telephone and fa* numbers (with countryand area code) are provided in addition to the address and the plete postaladdress. Contact details must be kept up to date by the corresponding author. Present/permanent addres

57、s. If an author has moved since the work described in the articlewas done, or was visiting at the time, a Present address (or Permanent address) may be indicatedas a footnote to that authors name. The address at which the author actually did the work must beretained as the main, affiliation address.

58、 Superscript Arabic numerals are used for such footnotes.AbstractA concise and factual abstract is required. The abstract should state briefly the purpose of theresearch, the principal results and major conclusions. An abstract is often presented separately fromthe article, so it must be able to sta

59、nd alone. For this reason, References should be avoided, but ifessential, then cite the author(s) and year(s). Also, non-standard or unmon abbreviations shouldbe avoided, but if essential they must be defined at their first mention in the abstract itself.KeywordsImmediately after the abstract, provi

60、de a ma*imum of 6 keywords, using American spelling andavoiding general and plural terms and multiple concepts (avoid, for e*ample, and, of). Be sparingwith abbreviations: only abbreviations firmly established in the field may be eligible. These keywordswill be used for inde*ing purposes.Abbreviatio

61、nsDefine abbreviations that are not standard in this field in a footnote to be placed on the first pageof the article. Such abbreviations that are unavoidable in the abstract must be defined at their firstmention there, as well as in the footnote. Ensure consistency of abbreviations throughout the a

62、rticle.AcknowledgementsCollate acknowledgements in a separate section at the end of the article before the references and donot, therefore, include them on the title page, as a footnote to the title or otherwise. List here thoseindividuals who provided help during the research (e.g., providing langu

63、age help, writing assistanceor proof reading the article, etc.).UnitsFollow internationally accepted rules and conventions: use the international system of units (SI). Ifother units are mentioned, please give their equivalent in SI.Math formulaePresent simple formulae in the line of normal te*t wher

64、e possible and use the solidus (/) instead ofa horizontal line for small fractional terms, e.g., */Y. In principle, variables are to be presented initalics. Powers of e are often more conveniently denoted by e*p. Number consecutively any equationsthat have to be displayed separately from the te*t (if referred to e*plicitly in the te*t).Matematical and technical settingsUse the appropriate number of significant figures to e*press your data - they should be justifiableand reflect the necessary level of accuracy of the method. A normal ma*i