外轉子式直流發電機設計含7張CAD圖帶開題報告-獨家.zip
外轉子式直流發電機設計含7張CAD圖帶開題報告-獨家.zip,外轉,直流發電機,設計,CAD,開題,報告,獨家
1 前言
電機行業是一個傳統的行業。經過200多年的發展，它已經成為現代生產、生活中不可或缺的核心、基礎，是國民經濟中重要的一環。作為勞動密集型產業，我國發展電機制造業有著得天獨厚的優勢。到目前為止，我國的電機制造業已經具有一定規模。據全國電工行業統計，2006年全國交流電機產量達到15000萬kw，同比增16％；汽輪發電機9583萬kw，同比增長21.64％，水輪發電機組1922萬kw，同比增長49.57％。在經過了2006年下半年的低速發展之后，2007年到現在，我國電機制造行業保持高速發展態勢。電機出口市場的需求還將在相當一個時期趨于穩定，交流電動機的國際市場需求也十分可觀，并將持續處于高速增長階段。隨著電機產品國外市場的進一步拓寬，中小型電機在出口數量、品種、產品檔次、創匯額上將會有重大突破。未來出口電機產量增長主要外部原因在于世界經濟穩定增長，促進了行業貿易產量的增長。內因是國內出口退稅率改革導致企業加快出口步伐，及國內外資企業規模的不斷擴大和數量的快速增加，產品競爭提高，在國內形成巨大的效益，也刺激了出口上升。隨著生產現代化程度的不斷提高和人們對家用電器、汽車等消費的不斷增加，市場對電機的需求也將越來越大。預計到2010年，全國發電裝機容量將達到6.6億千瓦左右，平均每年將投產發電裝機容量3700萬千瓦以上，年均增長7.8%左右。而電動機的需求與發電設備的需求呈1∶3.51的正比關系，據此分析，大型、中小型交流電動機產品在國內市場的有效需求會保持穩定增長。
2 電機的起源與發展
電機工作基本原理是利用帶電導體和磁場間的相互作用而把電能變?yōu)闄C(jī)械能。電動機結構主要包括兩部分：轉子和定子。轉子為電動機的旋轉部分，由轉軸座組成，導體繞組的排列方式?jīng)Q定電動機的類型及其特性。
1821年英國科學家法拉第首先證明可以把電力轉變?yōu)樾D(zhuǎn)運動。最先制成電動機的人，據說是德國的雅可比。他于1834年前后成了一種簡單的裝置：在兩個u型電磁鐵中間，裝一六臂輪，每臂帶兩根棒型磁鐵。通電后，棒型磁鐵與u型磁鐵之間產生相互吸引和排斥作用 ，帶動輪軸轉動。后來，雅可比做了一具大型的裝置。安在小艇上，用320個丹尼爾電池供電，1838年小艇在易北河上首次航行，時速只有2.2公里，與此同時，美國的達文波特也成功地制出了驅動印刷機的電動機，印刷過美國電學期刑《電磁和機械情報》。但這兩種電動機都沒有多大商業價值，用電池作電源，成本太大、不實用。
直到第一臺實用直流發動機問世 ，電動機才廣泛應用。1870年比利時工程師格拉姆發明了直流發電機，在設計上，直流發電機和電動機很相似。后來，格拉姆證明向直流發動機輸入電流，其轉子會象電動機一樣旋轉。于是，這種格拉姆型電動機大量制造出來。效率也不斷提高。與此同時，德國的西門子接著制造更好的發電機，并著手研究由電動機驅動的車輛，于是西門子公司制成了世界電車。1879年，在柏林工業展覽會上，西門子公司不冒煙的電車贏得觀眾的一片喝彩。西門子電機車當時只有3馬力，后來美國發明大王愛迪生試驗的電機車已達12─15馬力。但當時的電動機全是直流電機，只限于驅動電車。
1888年南斯拉夫出生的美國發明家特斯拉發明了交流電動機。它是根據電磁感應原理制成，又稱感應電動機，這種電動機結構簡單，使用交流電，無需整流，無火花，因此被廣泛應用于工業的家庭電器中，交流電動機通常用三相交流供電。
1902年瑞典工程師丹尼爾森首先提出同步電動機構想。同步電動機工作原理同感應電動機一樣，由定子產生旋轉磁場，便轉子繞組用直流供電，轉速固定不變，不受負載影響。因此同步電動機特別適用于鐘表，電唱機和磁帶錄音機。
直流電動機是直流激磁，工作特性接其激磁繞組的接線方式不同而有區別。串激電動機起動轉矩大，適用于牽引和起重，并激電動機轉速隨負載大小而變動較小，且可以調節，可用為定速或調速之用，復激電動機兼有以上兩種激磁方式發動機的特性。
交流換向器電動機，即轉子具有換向器的交流電動機。因它既可用于交流 又可用于直流，故稱作交直流兩用電動機或通用電動機，多用于家用電器。
3 直流電機的簡介
3.1 直流發電機工作原理
直流發電機的工作原理就是把電樞線圈中感應的交變電動勢，靠換向器配合電刷的換向作用，使之從電刷端引出時變?yōu)橹绷麟妱?dòng)勢的原理。
感應電動勢的方向按右手定則確定（磁感線指向手心，大拇指指向?qū)w運動方向，其他四指的指向就是導體中感應電動勢的方向。）
和電刷 A接觸的導體永遠位于 N極下，同樣，和電刷 B接觸的導體永遠位于S 極下。因此，電刷 A始終有正極性，電刷 B始終有負極性，所以電刷端能引出方向不變的但大小變化的脈振電動勢。如果電樞上線圈數增多，并按照一定的規律把它們連接起來，可使脈振程度減小，就可獲得直流電動勢。這就是直流發電機的工作原理。
3.2 直流電機的原理結構
直流電動機是依靠直流工作電壓運行的電動機，廣泛應用于收錄機、錄像機、影碟機、電動剃須刀、電吹風、電子表、玩具等。 電磁式直流電動機 電磁式直流電動機由定子磁極、轉子（電樞）、換向器（俗稱整流子）、電刷、機殼、軸承等構成，
電磁式直流電動機的定子磁極（主磁極）由鐵心和勵磁繞組構成。根據其勵磁（舊標準稱為激磁）方式的不同又可分為串勵直流電動機、并勵直流電動機、他勵直流電動機和復勵直流電動機。因勵磁方式不同，定子磁極磁通（由定子磁極的勵磁線圈通電后產生）的規律也不同。
串勵直流電動機的勵磁繞組與轉子繞組之間通過電刷和換向器相串聯，勵磁電流與電樞電流成正比，定子的磁通量隨著勵磁電流的增大而增大，轉矩近似與電樞電流的平方成正比，轉速隨轉矩或電流的增加而迅速下降。其起動轉矩可達額定轉矩的5倍以上，短時間過載轉矩可達額定轉矩的4倍以上，轉速變化率較大，空載轉速甚高（一般不允許其在空載下運行）?？赏ㄟ^(guò)用外用電阻器與串勵繞組串聯（或并聯）、或?qū)⒋畡?lì)繞組并聯換接來實現調速。
并勵直流電動機的勵磁繞組與轉子繞組相并聯，其勵磁電流較恒定，起動轉矩與電樞電流成正比，起動電流約為額定電流的2.5倍左右。轉速則隨電流及轉矩的增大而略有下降，短時過載轉矩為額定轉矩的1.5倍。轉速變化率較小，為5%~15%。可通過消弱磁場的恒功率來調速。
他勵直流電動機的勵磁繞組接到獨立的勵磁電源供電，其勵磁電流也較恒定，起動轉矩與電樞電流成正比。轉速變化也為5%~15%。可以通過消弱磁場恒功率來提高轉速或通過降低轉子繞組的電壓來使轉速降低。
復勵直流電動機的定子磁極上除有并勵繞組外，還裝有與轉子繞組串聯的串勵繞組（其匝數較少）。串聯繞組產生磁通的方向與主繞組的磁通方向相同，起動轉矩約為額定轉矩的4倍左右，短時間過載轉矩為額定轉矩的3.5倍左右。轉速變化率為25%~30%（與串聯繞組有關）。轉速可通過消弱磁場強度來調整。
換向器的換向片使用銀銅、鎘銅等合金材料，用高強度塑料模壓成。 電刷與換向器滑動接觸，為轉子繞組提供電樞電流。電磁式直流電動機的電刷一般采用金屬石墨電刷或電化石墨電刷。 轉子的鐵心采用硅鋼片疊壓而成，一般為12槽，內嵌12組電樞繞組，各繞組間串聯接后，再分別與12片換向片連接。
4 外轉子直流電機的發展現狀
1、無機械式轉子位置傳感器控制
轉子位置傳感器是整個驅動系中最為脆弱的部件，不僅增加了系統的成本和復雜性，而且降低系統的可靠消息和抗干擾能力，同時還需要占據一定的空間位置，在很多應用場合，例如空調器和計算機外設都要求無刷直流電動機以無轉子位置傳感器方式運行。
無轉子位置傳感器運行實際上就是要求在不采用機械傳感器的條件下，利用電機的電壓和電流信息獲得轉子磁極的位置，目前比較成熟的無轉子位置傳感器運行控制方法有：a、反電動勢法；b、定子三次諧波檢測法；c、續流二極管電流通路檢測法。
2、轉矩脈動控制
存在轉矩是直流電動機的固有缺點，特別是隨著轉速升高，換相導致轉矩脈動加劇，并使平均轉矩顯著下降。減小轉矩脈動是提高無刷直流電動機性能的重要方面。
3、智能控制
隨著信息技術和控制理論的發展，在運動控制領域中，一個新的發展方向就是先進控制理論，尤其是智能控制理論的應用。隨著直流電動機應用范圍的擴大，智能控制技術受到廣泛的重視。
5 外轉子直流電機的結構特點
外轉子直流電動機是一種用電子換向線路和轉子位置代替有刷直流電動機的電機，它具有運行可靠，維護方便，結構簡單，無勵磁損耗且可方便地實現無級調速等優點。永磁無刷直流電動機在結構上可分為兩類：一是內轉子永磁無刷直流電動機，即定子在外，永磁體在內；另一類是外轉子永磁無刷直流電動機，即定子在內，永磁本在外。
與感應電動機相比，無刷直流電動機具有更大功率密度，更高的效率和更好的控制性能，主要表現在以下幾個方面：
1、由于采用高性能永磁性材料，，無刷直流電動機轉子體積得以減小，可以具有較低的慣性，更快的響應速度，更高的轉矩慣量比。
2、由于沒有轉子損耗，也無需定子勵磁電流分量，所以無刷直流電動機具有較高的效率和功率密度。對于同等容量輸出，感應電動機需要更大的功率整流器和逆變器。
3、由于沒有轉子發熱，無刷直流電動機也無需考慮轉子冷卻問題。
4、永磁無刷直流電動機將感應電動機非線性本質和復雜的控制系統簡化為離散六狀態的轉子位置控制，無需坐標變換。
6 本課題研究意義及價值
畢業設計是大學教學中最后一個實踐性教學環節，通過該設計過程，可以檢驗學生所學的知識，同時培養學生處理工程中實際問題的能力，因此意義特別重大。
通過本次設計我們還能夠達到下面的目的：
（1）培養綜合分析和解決本專業的一般工程技術問題的獨立工作能力，拓寬和深化學生的知識。
（2）培養學生樹立正確的設計思想，設計構思和創新思維，掌握工程設計的一般程序規范和方法。
（3）培養學生樹立正確的設計思想和使用技術資料、國家標準等手冊、圖冊工具書進行設計計算，數據處理，編寫技術文件等方面的工作能力。
（4）培養學生進行調查研究，面向?qū)嶋H，面向生產，向工人和技術人員學習的基本工作態度，工作作風和工作方法。
7 總結
隨著我國經濟的高速發展，人們制造水平的不斷提高，對電機的要求也是越來越嚴格。直流電動機的機械特性和調節特性的線性度好，調速范圍廣，壽命長，維護方便噪聲小，所以這種電動機在控制系統中有很大的應用。是傳統控制電動機強有力競爭者，具有強大的市場潛力。
本設計論文對外轉子直流電機目前發展現狀進行了全面的調查和總結，分析了直流電機的特征，介紹了目前國內關于直流電機的發展現狀及發展趨勢。系統的說明了直流電機的作用及工作原理。詳細的設計出一種符合設計要求的外轉子式直流電動機，到達了預期的效果和畢業設計的目的。
參考文獻
1、葉金虎，無刷直流電動機，科學出版社，1982
2、張深，直流無刷電動機原理及應用，機械工業出版社，1996
3、沈建新，永磁無刷直流電動機特殊繞組結構及無位置傳感器控制的研究，浙江大學博士論文，1997
4、林友仰、葉云岳，電機優化技術，浙江大學出版社，1989
5、李燁等，永磁無刷直流電機技術發展水平與應用前景，微電機，2001
6、胡虔生等，電機學，水利電力出版社，2001
7、盛劍霓，工程電磁場數值分析，西安交通大學出版社，1991
8、王沖權，電機的計算機輔助設計與優化技術，上海交通大學出版社，1989
9、陳世坤，電機設計(上、下)，機械工業出版社，1997
10、顧興寶，高功率密度永磁無刷直流電動機，微特電機，2000
11、王秀和，永磁電機漏磁系數的確定，微特電機，1999
12、竇曉霞，永磁電機氣隙磁場分析與磁鋼選擇，微電機，2000
13、劉瑞芳，胡敏強等，永磁電機中永磁體數學模型的分析，微電機，2000
14、方瑞明、胡虔生，異步電機設計混合型專家系統，中小型電機，2000
15、方瑞明，永磁直流無刷電機設計混合型專家系統的研究，微電機，2001
16、鄭柒拾、王風翔，永磁無刷直流電機的繞組參數計算，沈陽S業大學學報，2000
17、洪文治，直流永磁電機計算程序及電樞反應研究，微特電機，2000
18、韓光寒等，無刷直流電動機電樞等效電阻的實例研究，微電機，2002
19、鞠立華、蔣書運 稀土永磁無刷直流電動機電磁場有限元分析,東南大學機械工程系碩士論文,2005
20、王淑紅,劉會飛,熊光煜,永磁無刷直流電動機的靜動態特性分析,太原理工大學電氣動力學院碩士論文,2005
21、鮑曉華，劉根，張敬華, 永磁無刷直流電動機運行特性的研究,合肥工業大學碩士論文,2002
22、徐惠明,外轉子永磁無刷直流電動機的結構設計,中國船舶工業總公司第七一二研究所期刊,1998第一期
5
英文原文
Introduction to D.C. Machines
D.C. machines are characterized by their versatility. By means of various combinations of shunt-, series-, and separately excited field windings they can be designed to display a wide variety of volt-ampere or speed-torque characteristics for both dynamic and steady state operation. Because of the ease with which they can be controlled, systems of D.C. machines are often used in applications requiring a wide range of motor speeds or precise control of motor output.
The essential features of a D.C. machine are shown schematically. The stator has salient poles and is excited by one or more field coils. The air-gap flux distribution created by the field winding is symmetrical about the centerline of the field poles. This is called the field axis or direct axis.
As we know, the A.C. voltage generated in each rotating armature coil is converted to D.C. in the external armature terminals by means of a rotating commutator and stationary brushes to which the armature leads are connected. The commutator-brush combination forms a mechanical rectifier, resulting in a D.C. armature voltage as well as an armature m.m.f. Wave then is 90 electrical degrees from the axis of the field poles, i.e. in the quadrature axis. In the schematic representation the brushes are shown in quadrature axis because this is the position of the coils to which they are connected. The armature m.m.f. Wave then is along the brush axis as shown. (The geometrical position of the brushes in an actual machine is approximately 90 electrical degrees from their position in the schematic diagram because of the shape of the end connections to the commutator.)
The magnetic torque and the speed voltage appearing at the brushes are independent of the spatial waveform of the flux distribution; for convenience we shall continue to assume a sinusoidal flux-density wave in the air gap. The torque can then be found from the magnetic field viewpoint.
The torque can be expressed in terms of the interaction of the direct-axis air-gap flux per pole and space-fundamental component of the armature m.m.f.wave. With the brushes in the quadrature axis the angle between these fields is 90 electrical degrees, and its sine equals unity. For a pole machine
（1-1）
In which the minus sign gas been dropped because the positive direction of the torque can be determined from physical reasoning. The space fundamental of the sawtooth armature m.m.f.wave is times its peak. Substitution in above equation then gives
（1-2）
Where, =current in external armature circuit;
=total number of conductors in armature winding;
=number of parallel paths through winding.
And
（1-3）
is a constant fixed by the design of the winding.
The rectified voltage generated in the armature has already been discussed before for an elementary single-coil armature. The effect of distributing the winding in several slots is shown in figure. In which each of the rectified sine wave is the voltage generated in one of the coils, commutation taking place at the moment when the coil sides are in the neutral zone. The generated voltage as observed from the brushes and is the sum of the rectified voltages of all the coils in series between brushes and is shown by the rippling line labeled in figure. With a dozen or so commutator segments per pole, the ripple becomes very small and the average generated voltage observed from the brushes equals the sum of the average values of the rectified coil voltages. The rectified voltage between brushes, Known also as the speed voltage, is
（1-4）
where is the design constant. The rectified voltage of a distributed winding has the same average value as that of a concentrated coil. The difference is that the ripple is greatly reduced.
From the above equations, with all variable expressed in SI units,
（1-5）
This equation simply says that the instantaneous power associated with the speed voltage equals the instantaneous mechanical power with the magnetic torque. The direction of power flow being determined by whether the machine is acting as a motor or generator.
The direct-axis air-gap flux is produced by the combined m.m.f. of the field windings. The flux-m.m.f. Characteristic being the magnetization curve for the particular iron geometry of the machine. In the magnetization curve, it is assumed that the armature –m.m.f. Wave is perpendicular to the field axis. It will be necessary to reexamine this assumption later in this chapter, where the effects of saturation are investigated more thoroughly. Because the armature e.m.f. is proportional to flux times speed, it is usually more convenient to express the magnetization curve in terms of the armature e.m.f. at a constant speed . The voltage for a given flux at any other speed is proportional to the speed, i.e.
（1-6）
There is the magnetization curve with only one field winding excited. This curve can easily be obtained by test methods, no knowledge of any design details being required.
Over a fairly wide range of excitation the reluctance of the iron is negligible compared with that of the air gap. In this region the flux is linearly proportional to the total m.m.f. of the field windings, the constant of proportionality being the direct-axis air-gap permeance.
The outstanding advantages of D.C. machines arise from the wide variety of operating characteristics that can be obtained by selection of the method of excitation of the field windings. The field windings may be separately excited from an external D.C. source, or they may be self-excited; i.e. the machine may supply its own excitation. The method of excitation profoundly influences not only the steady-state characteristics, but also the dynamic behavior of the machine in control systems.
The connection diagram of a separately excited generator is given. The required field current is a very small fraction of the rated armature current. A small amount of power in the field circuit may control a relatively large amount of power in the armature circuit; i.e. the generator is a power amplifier. Separately excited generators are often used in feedback control systems when control of the armature voltage over a wide range is required. The field windings of self-excited generators may be supplied in three different ways. The field may be connected in series with the armature, resulting in a series generator. The field may be connected in shunt with the armature, resulting in a shunt generator, or the field may be in two sections, one of which is connected in series and the other in shunt with the armature, resulting in a compound generator. With self-excited generators residual magnetism must be present in the machine iron to get the self-excitation process started.
In the typical steady-state volt-ampere characteristics, constant-speed prime movers being assumed. The relation between the steady state generated e.m.f. and the terminal voltage is
（1-7）
where is the armature current output and is the armature circuit resistance. In a generator, is larger than and the electromagnetic torque is a counter torque opposing rotation.
The terminal voltage of a separately excited generator decreases slightly with increase in the load current, principally because of the voltage drop in the armature resistance. The field current of a series generator is the same as the load current, so that the air-gap flux and hence the voltage vary widely with load. As a consequence, series generators are normally connected so that the m.m.f. of the series winding aids that of the shunt winding. The advantage is that through the action of the series winding the flux per pole can increase with load, resulting in a voltage output that is nearly usually contains many turns of relatively small wire. The series winding, wound on the outside, consists of a few turns of comparatively heavy conductor because it must carry the full armature current of the machine. The voltage of both shunt and compound generators can be controlled over reasonable limits by means of rheostats in the shunt field.
Any of the methods of excitation used for generators can also be used for motors. In the typical steady-state speed-torque characteristics, it is assumed that motor terminals are supplied from a constant-voltage source. In a motor the relation between the e.m.f. generated in the armature and terminal voltage is
（1-8）
where is now the armature current input. The generated e.m.f. is now smaller than the terminal voltage , the armature current is in the opposite direction to that in a generator, and the electron magnetic torque is in the direction to sustain rotation of the armature.
In shunt and separately excited motors the field flux is nearly constant. Consequently increased torque must be accompanied by a very nearly proportional increase in armature current and hence by a small decrease in counter e.m.f. to allow this increased current through the small armature resistance. Since counter e.m.f. is determined by flux and speed, the speed must drop slightly. Like the squirrel-cage induction motor, the shunt motor is substantially a constant-speed motor having about 5% drop in speed from no load to full load. Starting torque and maximum torque are limited by the armature current that can be commutated successfully.
An outstanding advantage of the shunt motor is case of speed control. With a rheostat in the shunt-field circuit, the field current and flux per pole can be varied at will, and variation of flux causes the inverse variation of speed to maintain counter e.m.f. approximately equal to the impressed terminal voltage. A maximum speed range of about 4 or 5 to I can be obtained by this method. The limitation again being commutating conditions. By variation of the impressed armature voltage, very speed ranges can be obtained.
In the series motor, increase in load is accompanied by increase in the armature current and m.m.f. and the stator field flux (provided the iron is not completely saturated). Because flux increase with load, speed must drop in order to maintain the balance between impressed voltage and counter e.m.f. Moreover, the increased in armature current caused by increased torque is varying-speed motor with a markedly drooping speed-load characteristic. For applications requiring heavy torque overloads, this characteristic is particularly advantageous because the corresponding power overloads are held to more reasonable values by the associated speed drops. Very favorable starting characteristics also result from the increase flux with increased armature current.
In the compound motor the series field may be connected either cumulatively, so that its m.m.f. adds to that of the shunt field, or differentially, so that it opposes. The differential connection is very rarely used. A cumulatively compounded motor has speed-load characteristic intermediate between those of a shunt and a series motor, the drop of speed with load depending on the relative number of ampere-turns in the shunt and series fields. It does not have disadvantage of very high light-load speed associated with a series motor, but it retains to a considerable degree the advantages of series excitation.
The application advantages of D.C. machines lie in the variety of performance characteristics offered by the possibilities of shunt, series and compound excitation. Some of these characteristics have been touched upon briefly in this article. Still greater possibilities exist if additional sets of brushes are added so that other voltages can be obtained from the commutator. Thus the versatility of D.C. machine system and their adaptability to control, both manual and automatic, are their outstanding features.
A D.C machines is made up of two basic components:
－The stator which is the stationary part of the machine. It consists of the following elements: a yoke inside a frame; excitation poles and winding; commutating poles (composes) and winding; end shield with ball or sliding bearings; brushes and brush holders; the terminal box.
－The rotor which is the moving part of the machine. It is made up of a core mounted on the machine shaft. This core has uniformly spaced slots into which the armature winding is fitted. A commutator, and often a fan, is also located on the machine shaft.
The frame is fixed to the floor by means of a bedplate and bolts. On low power machines the frame and yoke are one and the same components, through which the magnetic flux produced by the excitation poles closes. The frame and yoke are built of cast iron or cast steel or sometimes from welded steel plates.
In low-power and controlled rectifier-supplied machines the yoke is built up of thin (0.5～1mm) laminated iron sheets. The yoke is usually mounted inside a non-ferromagnetic frame (usually made of aluminum alloys, to keep down the weight). To either side of the frame there are bolted two end shields, which contain the ball or sliding bearings.
The (main)excitation poles are built from 0.5～1mm iron sheets held together by riveted bolts. The poles are fixed into the frame by means of bolts. They support the windings carrying the excitation current.
On the rotor side, at the end of the pole core is the so-called pole-shoe that is meant to facilitate a given distribution of the magnetic flux through the air gap. The winding is placed inside an insulated frame mounted on the core, and secured by the pole-shoe.
The excitation windings are made of insulated round or rectangular conductors, and are connected either in series or in parallel. The windings are liked in such a way that the magnetic flux of one pole crossing the air gap is directed from the pole-shoe towards the armature (North Pole), which the flux of the next pole is directed from the armature to the pole-shoe (South Pole).
The commutating poles, like the main poles, consist of a core ending in the pole-shoe and a winding wound round the core. They are located on the symmetry (neutral) axis between two main poles, and bolted on the yoke. Commutating poles are built either of cast-iron or iron sheets.
The windings of the commutating poles are also made from insulated round or rectangular conductors. They are connected either in series or in parallel and carry the machine's main current.
The rotor core is built of 0.5～1mm silicon-alloy sheets. The sheets are insulated from one another by a thin film of varnish or by an oxide coating. Both some 0.03～0.05mm thick. The purpose is to ensure a reduction of the eddy currents that arise in the core when it rotates inside the magnetic field. These currents cause energy losses that turn into heat. In solid cores, these losses could become very high, reducing machine efficiency and producing intense heating.
The rotor core consists of a few packets of metal sheet. Redial or axial cooling ducts (8～10mm inside) are inserted between the packets to give better cooling. Pressure is exerted to both side of the core by pressing devices foxed on to the shaft. The length of the rotor usually exceeds that of the poles by 2～5mm on either side－the effect being to minimize the variations in magnetic permeability caused by axial armature displacement. The periphery of the rotor is provided with teeth and slots into which the armature winding is inserted.
The rotor winding consists either of coils wound directly in the rotor slots by means of specially designed machines or coils already formed. The winding is carefully insulated, and it secured within the slots by means of wedges made of wood or other insulating material.
The winding overcharge are bent over and tied to one another with steel wire in order to resist the deformation that could be caused by the centrifugal force.
The coil-junctions of the rotor winding are connected to the commutator mounted on the armature shaft. The commutator is cylinder made of small copper. Segments insulated from one another, and also from the clamping elements by a layer of minacity. The ends of the rotor coil are soldered to each segment.
On low-power machines, the commutator segments form a single unit, insulated from one another by means of a synthetic resin such as Bakelite.
To link the armature winding to fixed machine terminals, a set of carbon brushes slide on the commutator surface by means of brush holders. The brushes contact the commutator segments with a constant pressure ensured by a spring and lever. Clamps mounted on the end shields support the brush holders.
The brushes are connected electrically－with the odd-numbered brushes connected to one terminal of the machine and the even-numbered brushes to the other. The brushes are equally spaced round the periphery of the commutator－the number of rows of brushes being equal to the number of excitation poles.
15
中文翻譯
直流電機的介紹
直流電機的特點是他們的多功用性。依靠不同的并勵、串勵和他勵勵磁繞組的組合，他們可以被設計為動態的和靜態的運轉方式從而呈現出寬廣范圍變化的伏安、－特性或速度－轉矩特性。因?yàn)樗?jiǎn)單的可操縱性，直流系統經常被用于需要大范圍發動機轉速或精確控制發動機的輸出量的場合。
直流電機的總貌如圖所示。定子上有凸極，而且由一個或幾個勵磁線圈勵磁。氣隙磁通量以磁極中心線為軸線對稱分布。這條軸線叫做磁場軸線或直軸。
我們都知道，在每個旋轉電樞線圈中產生的交流電壓，經由一與電樞聯接的旋轉的換向器和靜止的電刷，在電樞線圈出線端轉換成直流電壓。換向器－電刷組合構成了一個機械整流器，它形成了一個直流電樞電壓和一個被固定在空間中的電樞磁勢波形。電刷的位置應使換向線圈也處于磁極中性區，即兩磁極之間。這樣，電樞磁勢波的軸線與磁極軸線相差90度,也就是在交軸上。在示意圖中，電刷位于交軸上，因?yàn)檫@是線圈和電刷相連的位置。這樣，電樞磁勢波的軸線也是沿著電刷軸線的（在實際電機中，電刷的幾何位置大約偏移圖例中所示位置90度，這是因?yàn)樵哪┒诵螤顦?gòu)成圖示結果與換向器相連。）。電刷上的電磁轉矩和旋轉電勢與磁通分布的空間波形無關；為了方便我們可以假設在氣隙中有一個正弦的磁通密度波形。轉矩可以從磁場的觀點分析得到。
轉矩可以用每個磁極的直軸氣隙磁通和電樞磁勢波的空間基波分量相互作用的結果來表示。在交軸上的電刷和這個磁場的夾角為90度，其正弦值等于1，對于一臺極電機
（1-1）
式中帶負號被去掉因?yàn)檗D(zhuǎn)矩的正方向可以由物理的推論測定出來。鋸齒電樞磁勢波的空間基波是它最大值的。代替上面的等式可以給出：
（1-2）
其中：=電樞外部點路中的電流；
=電樞繞組中總導體數；
=通過繞組的并聯支路數；
及 （1-3）
其為一個由繞組設計而確定的常數。
簡單的單個線圈的電樞中的整流電壓前在面已被討論過。將繞組分散在幾個槽中的效果可用圖形表示，在圖示中每一個整流的正弦波是在線圈中產生的電壓,換向線圈邊處于磁中性區。從電刷觀察到的電壓是電刷間所有串聯線圈中整流電壓的總和，在圖中標以的文波表示。每個磁極用12個或更多換向片,可以使波動變得很小。從電刷中觀測到平均產生的電壓等于整流線圈電壓的平均值的總和。電刷之間整流電壓，即旋轉電勢為
（1-4）
為常數。分布繞組的整流電壓與集中繞組有相同的平均值，不同的是波動大大減低了。
在上面的等式中，所有的變量都是標準國際單位制。
（1-5）
這個等式清楚地說明，與旋轉電勢相關的瞬間功率等于與磁場轉矩有關的瞬時機械功率，能量的流向是由設備的確定，是發動機還是發電機。
直軸氣隙磁量由勵磁繞組的合成磁勢產生，其磁通—磁勢曲線就是電機的具體鐵磁材料的幾何尺寸決定的磁化曲線。在磁化曲線中, 假設電樞磁勢波的軸線與磁場軸垂直，因此假定電樞磁勢對直軸磁通不產生作用。在本文的后面有必要重新檢驗這一假設，飽和效應會深入研究。因?yàn)殡姌须妱?shì)是與磁通、時間、速度成比例，所以通常用恒定轉速下的電樞電勢來表示磁化曲線更為方便。任意轉速電壓時，任一給定磁通下的電壓與轉速成正比，也就是說
（1-6）
圖中磁化曲線只有一個勵磁繞組勵磁的，這種曲線可以通過測試的方法輕松獲得，不需要任何設計步驟的知識。
大范圍勵磁下的鐵磁阻與空氣氣隙相比可以忽略不計，在這種情況下磁通與勵磁繞組的總磁勢成線性比例關系，比例常數就是直軸的氣隙導磁性。
直流電機的顯著優勢源自于通過選擇勵磁繞組的勵磁方式而獲得不同的運轉方式。勵磁繞組可以從外部直流電源以他勵的方式勵磁，也可以以自勵的方式勵磁。換句話，直流電機可以提供自身勵磁。勵磁方式不僅極大地影響它的靜態特性，而且極大地影響在控制系統中電機的動態性能。
他勵發電機的聯接圖解已經給出的。所需的勵磁電流只是電樞電流中的一小部分。在勵磁電路中少量的功率可以控制相對一大部分電樞電路的功率。換句話說，發電機是一個功率放大器，當需要在大范圍控制電樞電壓時，他勵發電機通常在反饋控制系統中使用。自勵發電機的勵磁繞組可以有三種不同的供電方式。勵磁線圈可以與電樞串聯起來，這便是串勵發電機；勵磁繞組可以與電樞并聯在一起，這便是并勵發電機。也可以同時以?xún)煞N方式相連接組成一個復勵發電機。為了引起自勵過程，在自勵發電機中必須存在剩磁。
在典型的靜態伏-安特性中，假定原動機速度恒定，穩態電動勢與端電壓之間的關系為
（1-7）
其中是電樞輸出電流，是電樞回路電阻。在發動機中，大于。電磁轉矩是一個反轉矩。
他勵發電機的端電壓隨著負載電流的增大而輕微的減小，主要是因?yàn)殡妷涸陔姌须娮枭系膲航怠４畡?lì)發電機中的勵磁電流與負載電流相同，所以氣隙磁通和電壓隨負載變化很大，因此很少采用串勵發電機。并勵發電機電壓隨負載增加會有所下降，但在許多應用場合，這并不妨礙使用。復勵發電機的連接通常使串勵繞組的磁勢與并勵繞組磁勢相加，其優點是通過串勵繞組作用，每極磁通隨著負載增加，從而產生一個隨負載增加近似為常數的輸出電壓。通常，并勵繞組匝數多，導線細；而繞在外部的串勵繞組由于它必須承載電機的整個電樞電流，所以其構成的導線相對較粗。不論是并勵還是復勵發電機的電壓都可借助并勵磁場中的變阻器在適度的范圍內得到調節。
所有勵磁的方法在電動機上同樣適用。在電動機典型的靜態轉速—轉矩特性中，電機端電壓假設由恒壓源供電，在電動機中感應的電勢與路端電壓間關系是
（1-8）
是電樞輸入電流。電勢小于端電壓。電樞電流與發電機中的方向相反，且電磁轉矩與電樞旋轉方向相同。
對于并勵與他勵電動機來說，磁場磁通基本近似為常數，因此轉矩的增加必須要求電樞電流近似成比例增大，同時為允許增大的電流通過小的電樞電阻，要求反電勢稍有減少。由于反電勢決定于磁通和轉速，因此，轉速必須稍稍降低。與鼠籠式感應電動機類似，并勵電動機實際是一種從空載到滿負荷的速度基本上只有5%的下降的恒速電動機。從起動轉矩到達到最大轉矩之間一直是被電樞電流所控制可以正常交替進行。
并勵電動機的一個顯著優點是速度控制，通過在并勵繞組回路裝上內部變阻器，勵磁電流和每極磁通都可任意改變。而磁通的變化導致轉速相反的變化以維持反電勢大致等于外施加端電壓。用這種方法我們可以獲得最大調速范圍為4或5比1，最高轉速同樣受到換向條件的限制。通過改變外施加電樞電壓，可以獲得很寬的調速范圍。
對于串勵電動機來說，電樞電流、電樞磁勢波以及定子磁場磁通隨負載增長而增長。因?yàn)橛捎谪?fù)載增大而造成的磁通增大，速度必須降低，這樣才可以維持反電勢與外加電壓之間的平衡。此外，由于磁通增加，所以轉矩增大所引起電樞電流的增大比并勵電動機中的要小。因此串勵電動機是一種具有明顯下降的轉
收藏