0118-制育秧缽機設計【全套6張CAD圖】
0118-制育秧缽機設計【全套6張CAD圖】,全套6張CAD圖,育秧,設計,全套,cad
畢業設計(論文)開題報告題目 制育秧缽機設計一、 題依據及意義 本次設計的目的是為了能綜合運用本專業所學知識,融會貫通。鞏固大學四年來所學專業基礎知識和專業知識,并運用所學的冷沖機械設計與優化設計知識,解決機械設計中的實際問題,提高分析問題,解決實際問題的能力. 目前,建設社會主義新農村是我國的一項政策。在建設社會主義新農村的過程當中,提高農業機械的生產效率、降低農業機械的成本是不容忽略的。從這一個方面來說,本課題制育秧缽機的改進設計響應國家政策,是有利于農村發展的,具有長遠的發展前景。 另一方面,通過本次設計提高外語、專業、計算機的綜合能力,創新開發研究能力及嚴謹?shù)墓ぷ髯黠L,提高實際工作能力。著重是培養綜合運用所學知識獨立分析、設計、解決實際生產問題和其它一些綜合能力,特別是工作能力,養成良好的工作態度、工作作風。另外,還可進一步熟悉有關標準和規范,能夠熟練使用有關設計手冊和熟悉編寫技術文件和設計說明書,進一步提高科技寫作的能力,加強對沖壓工藝與模具設計的了解。 本次設計,根據給定的舊式育秧缽機機構,分析其工藝性及經濟性,創新設計新的更合理的育秧缽機。在設計過程中,先進行設計調研,全面了解育秧缽機的發展現狀和主要技術參數,從而使我在設計過程中具有較強的針對性,才能在設計正確合理的基礎上敢于創新。二、 國內外研究概況及發張趨勢(含文獻綜述) (一)國內外研究概況中國是個農業大國,在農業生產過程中培育良好的秧苗是一個重要的環節。育苗技術是農業科技一直關注的。隨著現代農業機械的發展,良好的育苗器械是培育好育苗的關鍵。因此育秧缽機的研究與發展在近些年取得了顯著的成就。下面是對育秧缽機相關資料的整理。 1.浙江理工大學機械工程系博士研究生楊文珍對圓盤式精密播種制缽機運動學進行優化設計。針對圓盤式精密播種制缽機缽體的定位精確、沖壓機構和缽盤機構之間運動配合緊湊,易發生干涉等問題,在分析圓盤式精密播種制缽機工作原理的基礎上,結合新的精密播種制缽工序,對制缽機的沖壓機構和缽盤機構分別進行運動分析;研究兩者的配合規律,推導出相應的位移方程,并在VB6.0平臺上進行運動學仿真模擬,得到了避免機構發生干涉條件和滿足機構運動要求的參數,實現了圓盤式精密播種制缽機的精密播種和營養缽體制造功能。機構運動仿真表明:沖壓制缽的時間在一個運動周期內所占的比例應少于58.4%,制缽機可以避免干涉,實現精密播種和制造營養缽。 2.上海市農機局的下屬農機研究所研制的ZB810型棉花育苗制缽機,機構緊湊、性能良好、適應田間作業。制成的缽體表面光滑、外緊內松、符合農業要求。育苗移栽后的棉花可全苗早發,增加伏前桃和伏桃,比其他移苗增產20%以上,勞動效率提高1-2倍。 3.我國制育秧缽機的發展歷程和美國、日本等發達國家有一定的距離。我國在70年代才開始研制水稻傳統育秧的半機械化及機械化插秧機和拔秧機。80年代后,引進日本技術,研制了帶土苗育秧和插秧機械,而對播種機械研究較少。 4.隨著機械制造技術的發展及加工技術與工藝的現代化,出現了輕便,可在不同時制育各種秧苗的制缽機。型制缽機邊是其代表,這中制缽機是棉花、玉米、烤煙和蔬菜等農作物實施營養缽育苗移栽機械化技術的先進適用機具,屬于種植業農業機械。該機由減速機構、攪土機構、間歇定位機構、曲柄滑塊沖壓等機構組成。(二)新老育缽機的比較 育秧缽最早是用手工制造的,其步驟如下: (1) 將肥料和土壤攪拌均勻,用篩子篩細; (2) 將上述土壤放入一個模子中; (3) 用一沖頭將土壤沖緊,沖頭下部有一凸頭; (4) 再將模子托起,育秧缽被沖出; 1.老式制缽機 這種制作方法很像制作蜂窩煤。它的動作過程是這樣的:電動機1經帶傳動、齒輪傳動將動力和運動傳給齒輪7。齒輪7一方面通過偏心銷使運動經由連桿8傳動滑動支架作上下移動,另方面齒輪7又由一對錐齒輪將運動傳到端面凸輪離合器11(它和軸用導向鍵聯接,不僅能隨陬轉動,而且還能在軸上移動)。若端面凸輪在旁邊固定著的從動滾子10的強制下,向上抬起并壓縮彈簧,離合器11就處在脫開狀態,在其下面的齒輪9(和軸空套)就不會轉動。當端面凸輪繼續轉到凸輪凹面與從動滾子10接觸時,端面凸輪就會在彈簧力的作用下向下推移。是離合器嚙合,運動就經過齒輪9帶動轉盤轉動。當轉到一定位置時,凸輪會再次轉到凸輪面與滑輪接觸,此時凸輪又會在滑輪的強制下使離合器再次脫開,齒輪9就會停止轉動。這一過程恰好轉盤轉過60,而被定位銷20銷住,也就是在轉盤停頓的時間里,滑動支架正好帶著固定在它上面的壓緊沖頭和沖出沖頭在??字凶饕淮紊舷峦鶑?fù)運動,以完成壓緊和沖出一只育秧缽的過程。 這種制缽機有如下的缺點: (1) 結構復雜、零件較多; (2) 容易損壞、不易維修; (3) 造價較高。 2.新方案的形成 在設計新的制缽機時有下面幾點值得改進: (1) 育秧缽機的壓制壓力較小,用手制造時估計沖擊壓力約為100公斤左右,故壓緊機構可以設計得簡單一些; (2) 老式制缽機的轉盤是間歇運動,是靠端面凸輪離合器實現的。凸輪每轉動60就停頓一次,機構比較復雜,凸輪不易制作,且容易失效,造價也高。如果有辦法在轉盤轉動的同時進行壓緊和沖出動作,就可以取消定位裝置和端面凸輪離合器專職,這樣,動作和機構都比較簡單、也不容易失效; (3) 攪拌叉19可以直接裝在齒輪9的軸上、省掉一對錐齒輪; (4) 用轉盤的方法將??邹D(zhuǎn)位,此方法比較見大,應該保留; (5) 傳動機構比較簡單,如有可能當然還可以設計得更簡單一些。 這樣,在參考老式制缽機的基礎上加以改進,就形成了一個新的設計方法。3、 研究內容及實驗方案 1.研究內容 電動機的選擇,傳動件的設計,執行機構的設計及設備零部件等的設計。 2.實驗方案 (1)先查閱相關資料,掌握育秧缽機的大體機構;(2)對其運動及受力參數進行分析計算;(3)主要零件的強度校核;四、目標、主要特色及工作進度 目標:1)每小時能生產3000個左右;2)結構簡單、體積小、拖動功率小、維修方便、造價低。 主要特色:結構簡單、生產效率高、拆裝方便、較好的制造工藝,性能穩定。 工作進度:1、 收集資料、外文資料翻譯、開題報告 (第1周第2周)2、 傳動方案的確定 (第3周第4周)3、 參數確定及設計計算 (第5周第7周)4、 制育秧缽機裝配圖設計及零部件圖設計 (第8周第15周)5、 撰寫畢業設計論文 (第8周第15周)五、參考文獻1 楊文珍,陸秋君,趙勻. 圓盤式精密播種制缽機運動學優化設計. 浙江大學學報(農業與生命科學版)31(3):346350,20052 楊文珍,趙 勻,陸秋君. 精密播種制缽機計算機分析與設計.中國農機化2004(1):31343 韓豹,馬守義,韓許.2Z-2型玉米缽育苗移栽機的研制.現代化農業.1996(11):134 楊文珍,趙勻,李革,俞高紅.播種制缽機的研究與展望.農機化研究.20031(1):56575 趙學田.自動機械自學入門. 北京:冶金工業出版社,19826 Patton W.J. Mechanical Power Transmission .New Jersey: Prentice-Hall, 19807 濮量貴,紀名剛.機械設計.7版.北京:高等教育出版社,20018 Mechanical Drive (Reference Issue).Machine Design. 52(14), 19809 龐啟淮.小功率電動機應用技術手冊.北京:機械工業出版社,199610 王世剛,張秀親,苗淑杰.機械設計實踐.哈爾濱:哈爾濱工程大學出版社,200311 徐灝.機械設計手冊.2版. 北京:機械工業出版社,2001 12 陸玉,何在洲,佟延偉.機械設計課程設計.3版. 北京:機械工業出版社,200013 孫桓,陳作模主編.機械原理.6版. 北京:高等教育出版社,200114 機械設計手冊編委會.機械設計手冊.新版.北京:機械工業出版社,200415 林景凡,王世剛,李世恒.互換性與質量控制基礎. 北京:中國科學技術出版社,199916 劉鴻文.材料力學.3版. 北京:機械工業出版社,1992制育秧缽機設計摘要:老式制育秧缽機由蜂窩煤成型機改進得來,體積龐大,結構復雜,成本高,效率低。本設計從老式制育秧缽機出發,在傳動系統和執行機構上都做了很大的改進。本機每小時能生產3000個缽體,可廣泛應用于玉米、蔬菜、瓜果等秧苗的制缽。該機采用單相電動機做動力源,可在廣大的農村使用,不用擔心需要較高的動力電壓的問題。文中較詳細的設計了制育秧缽機的傳動系統和執行機構,對各個零件做了具體的結構尺寸設計,并對受載荷較大的零件進行了精確的校核。包括齒輪、帶輪、軸和軸承等零部件的校核。該機的設計大量運用標準件,大大縮短了設計工作量和降低了生產制造周期及成本。主要設計內容有:方案的確定;電機的選擇;各軸的轉速、功率和轉矩計算;帶、齒輪、及錐齒輪的設計與計算;軸的最小直徑;帶、齒輪、及錐齒輪的尺寸計算以及方案圖、裝配圖和零件圖的繪制。關鍵詞:制育秧缽機 缽體 傳動系統 執行機構 Design of the legacy of seedlingsAbstract: The old system of seedlings from the legacy of improvement in the briquettes machine, the size, structure complex, high cost and low efficiency. The design of the legacy from the old system of starting seedlings in the transmission system and executing agencies have done on a lot of improvement. The machine can produce per hour legacy of 4000, can be widely applied to corn, vegetables, fruits and other seedlings of the legacy system. The aircraft uses a single-phase motors to power source, can be used in the vast rural areas, need not worry about a higher power voltage problem. In a more detailed design of the system for the seedlings Bowl drive system and implementing agencies, the various parts to do a specific size of the structure design, and in the larger load of spare parts for the precise calibration. Including gear, pulley, and axle bearings and other parts of the check. The extensive use of the aircraft design standard parts, greatly reducing the workload of the design and lower manufacturing costs and manufacturing cycle. Main design elements include: the determination of the project, choice of Motor and the speed of every axial, the calculation of power and torque, the design and calculation of the belt or gear and the Bevel gear, the smallest diameter of axis, calculation to the size of belt wheel and gears and Bevel gear and protracting the drawing of the project and the assemblage and the part.Key words: the legacy of the legacy of seedlings Bowl transmission system Implementing agencies Signature of the Supervisor: IILow-cost wind power can provide a new wind turbine Abstract: The first generation of commercial proliferation of enhanced wind turbine (DAWT) in New Zealand has just begun trial operation two years, if the developers to achieve the expected results, this new design of wind machines to be significantly reduced cost of wind power. New Zealand in the distance about 100 km Aokelannan the Waikaretu on top of a hill, a revolutionary new wind turbine is a two-year trial operation. The wind machines and the appearance of conventional wind turbine completely different compared to its height of 17 m, much like a Juwu squatted on the Peak, and the conventional wind turbine is a slender body, tall and towering over the top of the hill. This is put into operation the first generation of commercial proliferation of enhanced wind turbine (DAWT: diffuser augmented wind turbine), if the developers to achieve the expected results, will lead to significant reduction in the cost of wind power. During the trial the new wind turbine technology, can also test the proliferation of Central Cover new materials, high-strength fibers to strengthen the steel reinforced concrete. Such wind turbine on the ground referred to as concrete wind turbine. In business, it is called Vortec7 of wind machines, because it has a 7 m in diameter rotor. Wind machines from nearly 100 small investors, set up a private company - Vortec Energy Limited responsible for the design and construction, the company raised 3.5 million U.S. dollars development of the prototype. Vortec Energy Limited is currently being further raise about 700 million dollars to build two sets of rotor diameter of 20 m of the unit. One of the new units will be in areas of high wind speed test, probably in the vicinity of Wellington, New Zealand, the average wind speed in another area. South Australia state government said that the design has a lot of interest in Adelaide and will speed up the installation of an average wind speed near the crew, because the state government that is a rare wind of renewable energy, the need to promote technical breakthroughs-state advantage of the more Lower average wind speed resource development. Two new type of rotor diameter of 20 m of the unit after the successful operation, Vortec Energy Limited will consider the possibility of Nasdaq Stock Exchange. Vortec7 unit performance data show that the rotor diameter of 20 m below the design to 0.031 U.S. dollars / kWh the price of Internet access, it will enable New Zealand and wind power can compete existing power plants, and other new methods of power generation compared to more Competitive. If Vortec function of wind power generation in this price level, in the development of wind power will rapidly become a powerful new force. Vortec Energy Limited is the backing of entrepreneurs Robin Johannink, he successfully operating a series of operations, but also Pacific Lithium (an extract from seawater lithium companies) backing. Johannink, said Vortec technology is an international product, but the technology in the New Zealand stock market was on the recognition and attention is not too high, in this difficult market. Therefore Vortec Energy Limited is considering the Nasdaq in New York Stock Exchange listing is likely to achieve in 1999. A proliferation of technology U.S. aerospace giant Grumman Space Company (now Northrop Grumman Corporation) spent eight years developing the proliferation of technology and a proliferation of enhanced wind turbine technology patents. It was the spread of a detailed analysis of fluid dynamics and the use of a 5 m in the wind tunnel model confirmed the results. The proliferation of wind turbine rotor in the lower reaches, and its role as a wing, the rear rotor in a low-voltage parts. This suction effect effective in around the rotor speed multiplied. Conventional wind turbine rotor can only be effective use of wind around 60 percent. show a pattern of proliferation. The proliferation of economy is the key to the lowest cost to maximize the size. Wind tunnel studies show that in 45-degree-proliferation structure, the wall of surface wind flow may be two slot maintained by the jet. In the prototype, the total size of the spread of further reduction, through the use of general and exports in diameter than 30 percent of the arc structure, enhance the hardness of Central enclosures. So that the design has been chosen to receive the minimum amount of material the size of the greatest proliferation. Vortec Energy Limited was awarded the Northrop Grumman Corporation with the proliferation of technology for a period of 20 years of global patents and 20 patents since the right to update the permit. Northrop Grumman Corporation to retain their own internal use of the proliferation of technology rather than enhance the commercial market for wind rights. Kenneth Foreman, former Grumman Space research team leader, Vortec Energy Corporation for technical advice, Vortec Energy Limited access to the Grumman Space Research Group eight years on all the records, test reports and patents. 2 materials technology Grumman Space Research Group in the development of proliferation-enhancing technologies in the face of a problem is that commercial-scale wind turbine materials must have high strength and long life, low cost features. Have aluminum, glass fiber, steel and reinforced concrete for the traditional assessment and accounting, but the wind can not meet the requirements of economic development. In all the assessment materials, the most desirable is reinforced concrete, but the use of traditional reinforced concrete, the size of the spread of the wind-rated output can only meet 70 kW. As small-scale units can not enhance the diffusion of technology business development. New Zealand in the use of reinforced concrete towers and the construction of ocean-going boats such equipment has a long history. On this basis, the structural engineer Alexander and Associates in 20 years has developed a new product - high-strength fibers to strengthen the steel reinforced concrete. This new material bending strength is three times the low-carbon steel, basically do not need maintenance. This new material could be economic to build the proliferation of larger, so that there is sufficient wind machines and conventional wind turbine output of the competition. Prototype rotor diameter of 7 m, height of 17 m, the highest output for 1 MW. Will be the construction of two units using the rotor diameter of 20 m, high 52 m, and efforts to 3 MW. The proliferation of the use of two-tier 3 m 1m 30mm of high-strength steel fiber reinforced concrete slab of reinforced composite formed. First laminate along the complex framework of the necessary two-way Wancheng surface and fixed in place. The second laminate on top, bending, and then filling in the foundation board surface two-way lock. Qu then these panels bonded together, and the hardened edge of dealing with a proliferation of segment. Complete assembly of the proliferation of good before the Academy of Engineering, University of Auckland in the single-plate assembly and a good segment of the spread of the stress test samples. 3 equipment balance In addition to enhancing the proliferation of technology and materials technology, wind machines are all conventional. Rotor equipped with a fixed pitch of the four leaves, leaves for the welding of the steel structure, the surface material for glass fiber. David Brown through a rotor speed gearbox or a conventional drivers 1 200min-1, 400V of the ABB companys synchronous generator, inverter generators running. Rotor, gearbox and generator () from the U.S. New World Power Company (New World Power) to provide. Frequency AC-DC rectifier first, and then the inverter for AC 50 Hz, the step-up transformer into the local electricity company 11 kV power grid. Rectifier / converter equipment from Auckland company Santon Technology Co., Ltd. design and manufacture, the company battery chargers and speed drive manufacturers have years of experience. Taking into account the proliferation of size, needs a large and stable foundation to prevent the wind loads and seismic, Lodging. Equipment was installed to a large-diameter circular orbit, the wind machine can along its 360-degree rotation, the rotating device on track with the wind control system for electrical devices (). This arrangement provides the foundation for stability. Because this type of wind turbine could avoid the proliferation of high winds and a protective cover from the rotor impact on the ability of strong winds, which do not need to control a simple design of the rotor blade pitch. This makes this type of wind turbine is very suitable for use in windy areas, and maintenance is very small. 4 design advantages The proliferation of enhanced wind machines compared with conventional wind turbine has many advantages, including: Low noise. Conventional wind turbine noise from the maximum speed at the top of the rotor and blade-through to the pillars. In Vortec unit, the rotor was a high-density material covered by the (proliferation of), which prevent the noise from the rotor end of the field radiation and therefore did not, as with conventional equipment, a major pillar of the noise. Less land. On the same terms of energy output, Vortec unit compared with conventional wind turbine requires less space, reducing the land purchase and rental costs. Without affecting the landscape. Vortec unit easily painted various colors, when watched from a distance when integrated with a variety of backgrounds, equipment Dunzuo the shape and undulating mountain village is coordination. Decay may gust. The proliferation of increase in output at the same time, but also as a way throttle, the peak wind gust decay, thus reducing the rotor to withstand the fluctuations and drive away from the stress. Birds less impact. Despite the wind function painted different colors to reduce the visual impact, but the bird flew near the very eye-catching, no birds impact of the rapidly rotating blades of the wind machine accident. Infrastructure costs and low-cost power generation. Wind machines use a very simple set pitch leaves, or do not need to pitch control brake control system. This will significantly reduce maintenance costs, particularly in New Zealands strong winds, and the equipment available to ensure a high rate. 5 prospects Rotor diameter of 7 m prototype wind turbine will be conducted six months of trial operation, the control system carefully debug and verify the design parameters. Initial measurements showed that the wind turbine rotor wind speed increased about 1.72 times, and this Grumman Space Research Group in the calculation of 0.5 m and their model on the results of wind tunnel test match. Vortec Energy companies have access to New Zealand Science and Technology Research Fund of the Ministry of business development funding of about 350,000 U.S. dollars to pay for six months the cost of the trial period. Surveillance and testing programme of technical support from the Industrial Research Ltd (Industrial Research Ltd.) Advisory Group and the University of Auckland (Auckland Uniservices) provide, in addition to the invitation of the British wind energy consulting international experts Garrad Hassan independent inspection and monitoring unit Vortec7 the trial operation Plan. Table 1 gives the Vortec unit future development programmes. If the pilot programme of the results coincides with the expected future proliferation of enhanced wind machines will become a global wind power development plan a major part, can be widely used in other developing regions. Support the technology although investors to bear high-risk, but it may be high returns. 能提供低成本風電的新型風力機 - 【摘要】第一代商用擴散體增強型風力機(DAWT)在新西蘭剛開始兩年試運行,如果開發者的預期結果得以實現,這種新設計的風力機可促使風電成本大幅度降低。 在距新西蘭奧克蘭南約100km的Waikaretu的一座小山頂上,一臺革命性的新型風力機正在進行為期兩年的試運行。這座風力機的外觀與常規風力機相比完全不同,其高度為17m,很象一巨物蹲在山頂上,而常規風力機則為一細長體,高高地矗立在山頂上。 這是投入運行的第一代商用擴散體增強型風力機(DAWT: diffuser augmented wind turbine),如果開發者的預期結果得以實現,將導致風力發電成本大幅度降低。在試驗新的風力機技術的同時,也可以試驗擴散體環罩的新材料、高強鋼絲纖維加強的鋼筋混凝土。此種風力機在當?shù)乇环Q為混凝土風力機。在商業上,它被稱為Vortec7型風力機,因為它有一個7m直徑的轉子。 風力機由近100家小型投資商組建的私人公司-Vortec能源有限公司負責設計和建設,該公司籌集了350萬美元開發原型機。Vortec能源有限公司目前正在進一步籌集約700萬美元,擬建設兩臺轉子直徑為20m的機組。其中一臺新機組將在高風速地區試驗,很可能在新西蘭的惠靈頓附近,另一臺在平均風速區。南澳大利亞州政府已對設計表示了很大的興趣并將在Adelaide附近加速安裝平均風速機組,因為州政府認為風力是一種少有的可再生能源,需要從技術上突破來帶動州內占優勢的較低平均風速資源的開發。 兩臺新型的轉子直徑20m的機組成功地運行后,Vortec能源有限公司將考慮在Nasdaq股票交易所上市的可能性。Vortec7機組的性能數據表明,轉子直徑20m的設計能夠以低于0.031美元/kWh的價格上網,它將使風力發電可與新西蘭現有的電廠相競爭,與其它新的發電方式相比,更具競爭力。如果Vortec型風力機能以這種價格水平發電,在風電開發中它將迅速成為一股強大的新生力量。 Vortec能源有限公司的后盾是企業家Robin Johannink,他成功地經營著一系列業務,也是Pacific Lithium公司(一家從海水中提取鋰的公司)的后盾。Johannink先生講Vortec技術是一項國際產品,但該技術在新西蘭股票市場上所獲得的認可和重視還不太高,難以在此上市。因此Vortec能源有限公司正在考慮在紐約的Nasdaq交易所上市,很可能在1999年實現。 1 擴散體技術 美國的航天巨頭Grumman空間公司(現在的Northrop Grumman公司)花費了8年時間開發擴散體技術并擁有擴散體增強型風力機技術的專利。它進行了擴散體流體動力學的詳細分析,并使用一5m的模型在風洞中證實了分析結果。擴散體位于風力機轉子的下游,其作用就象一個機翼,在轉子后部產生低壓部位。這種抽吸效應有效地使轉子周圍的風速成倍增加。常規的風力機只能有效地利用轉子周圍風速的60%左右。示出了擴散體的流態。 擴散體經濟性的關鍵在于以最低成本獲得最大的尺寸。風洞研究表明在45度擴散體結構中,內壁附面流可由兩級風槽射流所維持。在該原型中,擴散體的總尺寸進一步減少,通過采用總長與出口直徑比為30%的弧形結構,環罩硬度增強。使已選擇的設計以最低的材料用量獲得了最大的擴散體尺寸。 Vortec能源有限公司獲得了Northrop Grumman公司頒發的擁有擴散體技術、為期20年的全球?qū)@麢?quán)及此后20年專利更新權的許可證。Northrop Grumman公司保留了它們自己內部使用擴散體增強技術而不用于風能商業市場的權利。Kenneth Foreman,原Grumman空間公司研究小組的領導者,為Vortec Energy公司的技術咨詢,Vortec能源有限公司獲得了Grumman空間公司研究小組8年研究的所有記錄、試驗報告及專利。 2 材料技術 Grumman空間研究小組在開發擴散體增強技術中所遇到的一個問題是商業規模風力機材料必須具有強度高、壽命長、成本低的特點。曾對鋁、玻璃纖維、鋼和傳統鋼筋混凝土進行過評估和核算,但都不能滿足風力機經濟開發的要求。在所有評估的材料中,最可取的是鋼筋混凝土,但使用傳統的鋼筋混凝土,擴散體尺寸使風力機額定出力只能達到70kW。由于機組規模太小無法對擴散體增強技術進行商業開發。 新西蘭在使用鋼筋混凝土建造水塔和遠洋快艇之類設備方面有悠久歷史。在此基礎上,結構工程師Alexander和Associates在20年中開發了一種新型的產品-高強鋼絲纖維加強的鋼筋混凝土。這種新材料的抗彎強度是低碳鋼的3倍,基本上不需要維修。這種新材料可以經濟地建造較大的擴散體,從而使風力機有足夠的出力和常規風力機相競爭。 原型機轉子直徑為7m,高度為17m,最高出力為1MW。將要建設的兩臺機組使用20m直徑的轉子,高52m,出力為3MW。 擴散體使用兩層3m1m30mm的高強鋼絲纖維加強的鋼筋混凝土板復合而成。第一層板沿著復雜的框架彎成所需的雙向曲面,并固定就位。第二層板放在頂部,彎曲成形,然后在基礎板上灌漿鎖定雙向曲面。再將這些曲面板粘結到一起,并對其邊緣進行硬化處理構成擴散體扇形段。完整的擴散體裝配好之前,在奧克蘭大學工程院對單塊板和裝配好的擴散體扇形段樣品進行了應力測試。 3 設備平衡 除了擴散體增強技術和材料技術外,風力機全部是常規的。轉子配備有定節距的4個葉片,該葉片內為焊接鋼架構,表面材料為玻璃纖維。轉子通過一David Brown升速變速箱驅動一常規的1 200min-1、400V的ABB公司生產的同步發電機,發電機變頻運行。轉子、變速箱和發電機()由美國的新世界電力公司(New World Power)提供。 變頻交流電先整流成直流電,然后逆變?yōu)?0Hz的交流電,經升壓變壓器送入當?shù)仉娏镜?1kV電網。整流器/換流器設備由奧克蘭公司Santon技術有限公司設計和制造,該公司對電池充電器和變速驅動器的制造有多年經驗。 考慮到擴散體的尺寸,需要一大型穩定的地基防止在大風載荷下和地震時倒伏。設備被安裝到一大直徑環行軌道上,風力機可以沿它旋轉360度,軌道上的旋轉裝置裝有迎風控制系統的電動裝置()。這種布置提供了穩定的基礎。 由于該種風力機可以避開大風且擴散體罩具有保護轉子不受大風影響的能力,因而轉子設計簡單不需要控制葉片節距。這使得該種風力機非常適合在大風地區使用,且維修量很小。 4 設計的優點 擴散體增強型風力機與常規風力機相比有許多優點,包括: 噪音低。常規風力機噪音來自速度最高的轉子頂部,并通過葉片傳向支柱。在Vortec機組中,轉子被一種高密度材料所覆蓋(擴散體),它防止了噪音從轉子末端向外輻射,因此沒有像用常規設備時大的支柱產生的噪音。 用地少。就同樣的能源輸出而言,Vortec機組與常規風力機相比需要較少的用地,減少了土地購置和租用費用。 不影響景觀。Vortec機組很容易地涂上各種顏色,當從遠距離觀看時能與各種背景相融合,設備蹲坐的外形與起伏的山村很協調。 可衰減陣風。擴散體在增加出力的同時,也作為阻風門,衰減陣風的峰值,因而減少了轉子所承受的轉距波動和驅動器上的應力。 鳥類撞擊少。盡管風力機能涂上不同的顏色降低了視覺影響,但對于飛到附近的鳥類卻很醒目,不會出現鳥類撞擊快速旋轉的風力機葉片的事故。 基建費用和發電成本低。風力機使用了非常簡單的定節距葉片,不需要節距控制制動器或控制系統。這將大幅度降低維修費用,特別是在新西蘭的大風地區,并將確保很高的設備可用率。 5 發展前景 轉子直徑為7m的原型風力機將要進行6個月的試運行,對控制系統進行仔細調試并驗證設計參數。初步測量數據表明,風力機轉子風速增強了約1.72倍,這與Grumman空間公司研究小組的計算和它們在0.5m模型上進行的風洞試驗結果相吻合。 Vortec Energy公司已獲得新西蘭科學與技術研究基金業務發展部的資助約350000美元,用以支付6個月試驗期的費用。 監視和試驗方案的技術支持由工業研究有限公司(Industrial Research Ltd.)和奧克蘭大學咨詢小組(Auckland Uniservices)提供,另外還邀請了英國國際風能咨詢專家Garrad Hassan獨立檢驗和監督Vortec7機組的試運行計劃。 表1給出了Vortec機組未來的開發方案。 如果試驗方案產生的結果與預期的相吻合,將來擴散體增強型風力機將成為全球風電開發方案的一個主要部分,可廣泛用于其它待開發的地區。支持該技術的投資者雖承受高風險,但它可能獲得高的回報。
收藏