機床立柱加工工藝及專用刀具設計

機床立柱加工工藝及專用刀具設計,機床,立柱,加工,工藝,專用,刀具,設計 畢業設計中英文翻譯學生姓名： 學號： 學 院： 機械設計制造及其自動化專 業： 指導教師： 2013年 5 月原文：48.4.4 Autonomous and Intelligent Machine ToolThe whole machining operation of conventional CNC machine tools is predetermined by NC programs. Once the cutting conditions, such as depth of cut and stepover, are given by the machining commands in the NC programs, they are not generally allowed to be changed during machining operations. Therefore NC programs must be adequately prepared and verified in advance, which requires extensive amounts of time and effort. Moreover, NC programs with fixed commands are not responsive to unpredictable changes, such as job delay, job insertion, and machine breakdown found on machining shop floors.Shirase proposed a new architecture to control the cutting process autonomously without NC programs. Figure 48.29 shows the conceptual structure of autonomous and intelligent machine tools (AIMac). AIMac consists of four functional modules called management, strategy, prediction, and observation. All functional modules are connected with each other to share cutting information.Fig. 48.29 Conceptual structure of AIMacDigital Copy Millingfor Real-Time Tool-Path GenerationA technique called digital copy milling has been developed to control a CNC machine tool directly. The digital copy milling system can generate tool paths in real time based on the principle of traditional copy milling. In digital copy milling, a tracing probe and a master model in traditional copy milling are represented by three-dimensional (3-D) virtual models in a computer. A virtual tracing probe is simulated to follow a virtual master model, and cutter locations are generated dynamically according to the motion of the virtual tracing probe in real time. In the digital copy milling, cutter locations are generated autonomously, and an NC machine tool can be instructed to perform milling operation without NC programs. Additionally, not only stepover, but also radial and axial depths of cut can be modified, as shown in Fig. 48.30. Also, digital copy milling can generate new tool paths to avoid cutting problems and change the machining sequence during operation 48.12.Furthermore, the capability for in-process cutting parameters modification was demonstrated, as shown in Fig. 48.31 48.13. Real-time tool-path generation and the monitored actual milling are shown in the lowerleft corner and the upper-right corner of this figure. The monitored cutting torque, adapted feed rate, and radial and axial depths of cut are shown in the lowerright corner of this figure. The cutting parameters can be modified dynamically to maintain the cutting load.Fig. 48.30ad Example of real-time tool-path generation.(a) Bilateral zigzag paths; (b) contouring paths; (c) change of stepover; (d) change of cutting depth Fig. 48.31 Adaptive milling on AIMacFig. 48.32 Results of machining process planning on AIMacFlexible Processand Operation Planning SystemA flexible process and operation planning system has been developed to generate cutting parameters dynamically for machining operation. The system can generate the production plan from the total removal volume (TRV). The TRV is extracted from the initial and finished shapes of the product and is divided into machining primitives or machining features. The flexible process and operation planning system can generate cutting parameters according to the machining features detected. Figure 48.32 shows the operation sequence and cutting tools to be used. Cutting parameters are determined for the experimental machining shape. The digital copy milling system can generate the tool paths or CL data dynamically according to these results and perform the autonomous milling operation without requiring any NC program. 48.5 Key Technologies for Future Intelligent Machine Tool Several architectures and technologies have been proposed and investigated as mentioned in the previous sections. However, they are not yet mature enough to be widely applied in practice, and the achievements of these technologies are limited to specific cases. Achievements of key technologies for future intelligent machine tools are summarized in Fig. 48.33. Process and machining quality control will become more important than adaptive control. Dynamic toolpath generation and in-process cutting parameters modification are required to realize flexible machining operation for process and machining quality control. Additionally, intelligent process monitoring is needed to evaluate the cutting process and machining quality for process and machining quality control. A reasonable strategy to control the cutting process and a reasonable index to evaluate machining quality are required. It is therefore necessary to consider utilization and learning of knowledge, knowhow, and skill regarding machining Operations. A process planning strategy with which one can generate flexible and adaptive working plans is required. An operation planning strategy is also required to determine the cutting tool and parameters. Product data analysis and machining feature recognition are important issues in order to generate operation plans autonomously.Sections 48.4.248.5 are quoted from 48.14.Fig. 48.33 Achievements of key technologies for future intelligent machine tools譯文：48.4.4 智能機床整個傳統數控機床的機械加工是在預定的數控程序下進行的。一旦切削條件（如切削深度和進給量）在數控程序指令中被指定，在機械加工操作中，他們一般不允許被改變。因此，數控程序必須有大量的時間和精力用來提前準備和驗證。此外，基于固定命令的數控程序在遇到不可預知的變化時不會響應，比如工作延遲和加工車間中的機器故障。Shirase提出了一種新的結構在沒有數控程序的情況下可以自動控制切削過程。圖48.29顯示了智能機床概念結構。AIMAC包括四個功能模塊稱為管理、策略、預測和觀察。所有功能模塊都與彼此分享切削信息。圖48.29 AIMac的概念結構l 數字仿形銑削-對刀具軌跡進行實時生成數字仿形銑削技術被研發出來后，它可以直接控制數控機床。數字仿形銑削系統可以根據系統的仿形銑削及時生成刀具路徑。在數字仿形銑削中，傳統仿形銑削中的跟蹤探測器和主模型通過計算機用三維虛擬模型表現出來。虛擬跟蹤探測器模擬虛擬主模型，根據動態的虛擬軌跡實時生成刀具坐標。在數字仿形銑削中，刀具坐標可自主生成，數控機床可以在沒有數控程序情況下可以按指示執行銑削操作。此外，不僅是行距，而且徑向和軸向切削深度也可以修改（見圖48.30）。同時，數字仿形銑削可以生成新的刀具路徑，以避免切削問題和改變操作工程中的加工順序48.12。此外，對于切割過程中的參數修改能力也得到了證實，如圖48.3148.13。在這個圖的左下角和右上角體現了對刀具軌跡進行即時生成和對當前銑削的監測。在此圖的右下角，監測切削扭矩、改變進擊速率以及徑向和軸向的切削深度。切削參數可以動態修改以保持合適的切削載荷。圖48.30 a-d對刀具軌跡即時生成案例(a).雙邊曲折路徑 (b).輪廓線路徑 (c).改變間距 (d).改變切削深度圖48.31 在AIMac下的自適應銑削圖48.32 在AIMac下的機械加工工藝l 柔性加工系統和操作規劃系統在機械加工中，柔性加工系統和操作規劃系統已經發展到可動態生成切削參數。該系統可以根據總?cè)コ可缮a(chǎn)計劃?？?cè)コ渴歉鶕?jù)產品的初始形狀和最終的完成形狀決定，他可分成加工基元和加工特性。該系統會根據檢測到的加工特性生成切削參數。圖48.32顯示了加工順序和切削刀具的使用。切削參數確定了試驗加工的形狀。數字仿形銑削系統可以生成刀具路徑或動態CL數據，根據這些結果便可以獨立完成銑削加工而不需要任何數控程序。48.5未來智能機床的關鍵技術如同上一節，該節提出和研究了一些結構和技術。然而，他們還沒有足夠的成熟來被廣泛地應用在實踐中。所以，這些科研成果只能被限制在特定情況下使用。在圖48.33中概述了實現未來智能機床的關鍵技術。過程和加工質量控制將成為更重要的自適應控制。動態刀具軌跡的生成和制造過程中的切削參數修改被要求實現靈活的加工操作和加工質量控制。此外，智能過程控制是對加工過程質量控制進行切削程序和加工質量的評估。必須用合理的方法來控制切削過程以及通過合理的指標來評估加工質量。因此考慮利用所獲取的學問、專業知識和關于加工操作的技巧是非常必要的。生產過程的規劃策略對于生成一個靈活和適應性的工作計劃是必需的。一個操作規劃策略也需要確定的切削刀具和參數。為了生成自己的操作方案，產品數據分析和加工特征識別顯得尤為重要。圖48.33實現未來智能機床獲的關鍵技術