1797_全自動書本打包機的送書裝置設計

1797_全自動書本打包機的送書裝置設計,全自動,書本,打包機,裝置,設計 全自動書本打包機的送書裝置學生姓名：高武 班級：088105411指導老師：賀紅林摘要：本課題是根據工廠打包書本和自動輸送問題我設計的自動打包機的送書裝置，該全自動輸送裝置是利用電機帶動滾筒轉動，使皮帶循環前進，推移書本已達到送書的目的.具有機構簡單、操作方便、維修容易、便于運輸?shù)葍?yōu)點。目前所有生產線的書本都是由人工打包裝箱，以目前的打包方式使整個生產現場顯的凌亂，從而影響了整理，整頓，清掃，節約，安全等制度。這個裝置目前在新華書店和各大書店都有廣泛使用！為此做了以下研究內容：（1）介紹了自動打包機送書裝置的研究背景，意義及其目的，通過對參考文獻進行詳細的分析，闡述了驅動電機，皮帶，滾筒等相關內容：（2）在技術路線中，論述了軸的選擇和滾筒的選擇及其基本參數的選擇和幾何尺寸的計算，二個主要強度的驗算等在這次設計中所需要考慮的一些技術問題做了介紹，（3）繪制了主要零件的工作圖和總的裝配圖（4）給出了一些參考文獻，可以用來查閱相關的資料，給我自己的設計帶來了方便。關鍵詞： 電機 滾筒 皮帶 打包機指導老師簽名：Send automatic book machine/model designStudent: Gao Wu class:088105411Supervisor: He Honglin Abstract: This topic is based on the factory packaging, books and design of automatic transmission problems I send device of automatic baler, the automatic transmission device is to use motor-driven rollers rotating, belt loops, over the book has reached the purpose of sending books. with simple, convenient operation, easy maintenance, easy to transport and so on. All production lines now books are all constructed to package, to packaging of the whole production field of messy, thus affecting the finishing, straightening out, cleaning, saving, safety system. This device is currently using Xinhua Bookstore and bookstore are in General! Do the following content:(1) introduces an automatic machine to send device of background, significance and purpose, through detailed analysis of reference describing drive motor, belts, rollers and other related content:(2) in the technical route, discusses choice of shaft and drum selection and calculation of basic parameters and geometric dimensions, two key strength checking computation of some technical issues to be considered in the design made a presentation,(3) the mapping of a major part of the work and General Assembly(4) references are given, can be used to access related information, easy to bring to my own design.Keywords: Motor rollers beltSignature of superisor: