【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
GQ50鋼筋切斷機結構設計與運動仿真
潘林豐
（陜理工學院機械工程學院機自專業1008班，陜西 漢中 723003）
指導老師：賈吉林
【摘要】
鋼筋切斷機是把鋼筋切成所需長度的專用機械,在大型建筑工地上的應用非常廣泛。鋼筋切斷機分為機械傳動和液壓傳動兩種。機械傳動式鋼筋切斷機,工作時大都采用電動機經一級三角帶傳動和三級齒輪傳動減速后,帶動曲軸旋轉,曲軸推動連桿使滑塊和動刀片在機座的滑道中作往復直線運動,使活動刀片和固定刀片相錯而切斷鋼筋。GQ50型鋼筋切斷機，其剪切運動是由一偏心輪連桿機構完成的。但是由于切斷機機體內腔狹小，在裝配曲軸連桿時比較困難。尤其是在使用中發生故障需要維修時，拆卸曲軸連桿更加不容易，給維修造成很大的不變，因此在不改變?cè)O(shè)備功能的情況下，我對曲軸連桿機構做了一些改進。改進后的偏心輪結構直接從機體的注冊孔中裝入和取出。而不必拆卸連桿，大大簡化了裝配程序，減輕的工人的勞動強度。同時也極大的方便了維修，還簡化了零件的工藝過程，取得良好的經濟效益。
【關鍵詞】：鋼筋切斷機；偏心輪；曲軸連桿機構
GQ50 reinforcing steel cutter structural design and movement simulation
Pan Linfeng
（Grade10,Class08,Major Mechanical Design，Manufacturing and Automation
Dept.，Shaanxi University of Technology，Hanzhong 723003Shaanxi）
Tutor：Jia Jilin
Abstract
Reinforcing steel cutting machine is used to cut the required length of steel machinery specialized for large construction sites in the application of very extensive. Reinforcing steel cutting machine into mechanical transmission and hydraulic transmission of two. Mechanical transmission reinforced cutting machine, working mostly used as a V-belt drive motor and gear drive slow down after three, driven crankshaft rotation, promoting the crankshaft and connecting rod to move the slider blade in the frame of the chute in a reciprocating linear motion So that the activities of the blade and a fixed blade and cut off the wrong steel. GQ50-steel cutter, whose movement from one type of the crankshaft linkage to complete. However, due to cut off the small inner cavity of the body, in the assembly when the crankshaft link more difficult. Especially in the use of a fault in need of repair, demolition crank link more difficult to repair a big change, so do not change the function of the equipment under the circumstances, we have made some improvement to crank linkage. The improved structure of the cam directly from the body of the aircraft registered in the hole and packed out. Without dismantling the link, greatly simplifies the assembly, reducing labor intensity of workers. But also greatly facilitate the maintenance, has also simplified the process of parts and achieved good economic returns.
Key words: steel cutting machine, the structure design, proe, virtual assembling, movement
simulation
目錄
1 緒論 1
1.1 鋼筋切斷機的研究現狀 1
1.2 本次設計的任務 2
1.3 本次設計目的與意義 3
2 鋼筋切斷機的總體設計 4
2.1 鋼筋切斷機的基本介紹 4
2.2 GQ50型鋼筋切斷機的改良方向 5
2.3鋼筋切斷機的工作原理 6
2.4 鋼筋切斷機的基本結構 6
2.4.1 GQ50型鋼筋切斷機主傳動機構的設計方案的確定 6
2.4.2 GQ50型鋼筋切斷機主傳動機構設計的基本思路 7
2.4.3 GQ50型鋼筋切斷機主傳動機構設計的方法 7
3 方案設計比較 8
3.1驅動裝置方案選擇 8
3.1.1液壓驅動 8
3.1.2 手動驅動 8
3.1.3 電機驅動 8
3.2傳動裝置方案選擇 9
3.2.1 液壓傳動 9
3.2.2 帶傳動 9
3.2.3 齒輪傳動 9
3.2.4 組合傳動 9
3.3執行裝置方案選擇 9
3.3.1曲柄滑塊機構 9
3.3.2齒輪齒條機構 10
3.3.3凸輪機構 10
4 鋼筋切斷機傳動設計 12
4.1電動機的選擇 12
4.2 基本傳動數據計算 12
4.2.1傳動比的分配 12
4.2.2 各軸的運動及動力參數分析 13
4.3 帶傳動的設計 14
4.3.1帶型的選擇 14
4.3.2帶輪基準直徑的確定 14
4.3.3帶速的確定 15
4.3.4中心距、帶長及包角的確定 15
4.3.5確定帶的根數 16
4.4 齒輪傳動的設計 16
4.4.1選材料、確定初步參數 16
4.4.2齒面疲勞強度計算 18
4.4.3齒根抗彎疲勞強度驗算 20
4.5 軸的設計 21
4.6鍵的選取與校核 22
4.6.1鍵的選取 22
4.6.2鍵強度的校核 22
4.7軸承的組合設計 23
4.8連桿的設計 24
4.9切斷鋼筋需用力計算 24
4.10減速器附件的選擇 25
5 鋼筋切斷機的摩擦、磨損和潤滑 26
6 機械式鋼筋切斷機調整及保養的使用 27
6.1 鋼筋切斷機的使用調整 27
6.2 鋼筋切斷機的保養 28
6.3鋼筋切斷機的一般安全的規定 29
7 建模與仿真 30
7.1 三維軟件的介紹 30
7.2 鋼筋切斷機的建模與仿真 31
7.2.1 鋼筋切斷機主要零件的三維建模 31
7.2.2 GQ50型鋼筋切斷機主傳動機構的裝配與仿真 40
致謝 43
參考文獻 44
- IV -
第 5頁 共44 頁