湖南省冷水江市塘沖礦45萬噸新井設計【含CAD圖紙+文檔】

湖南省冷水江市塘沖礦45萬噸新井設計【含CAD圖紙+文檔】,含CAD圖紙+文檔,湖南省,冷水江市,塘沖礦,45,萬噸新井,設計,cad,圖紙,文檔 摘 要 本設計是針對湘煤集團唐沖煤礦所做的礦井初步設計。唐沖煤礦自然地質條件中等，可采煤層三號煤平均厚2.76m，傾角一般為10°～25°左右。礦井正常涌水量為118m3/h，最大涌水量為179 m3/h。礦井絕對瓦斯涌出量為10.78 m3/min，相對瓦斯涌出量為11.35 m3/t，預測為高瓦斯礦井。煤塵具有爆炸危險性，煤層沒有自燃發火傾向。井田東西長1.8~2.1km，南北寬約為4.5km，面積約10km2，設計井田的可采儲量為3032萬t，設計年產量為0.45Mt，服務年限為51a。 本設計礦井采用斜井兩水平水開拓，采區式準備方式，采區內采用走向長壁采煤法，全部垮落法管理頂板，礦井前期采用對角式通風。主要對礦井開拓方式、準備方式、采煤方法進行了初步設計，對礦井運輸、通風、排水等生產系統進行了設備選型計算，對礦井各個生產系統的生產過程進行了描述，并對礦井各個生產系統和各生產環節之間的相互聯系和制約關系進行了有關說明。 關鍵詞： 立井 塘沖煤礦 高瓦斯 走向長壁采煤法 Abstract This preliminary design is designed for Tang Chong mine of in HuNan province. The natural geological condition is medium, the mining seam :the average thickness is 2.76m,.Generally,the dip is 10°～25°.Normally,the water-holding capacity is118 m3/h,the largest water-holding capacity is 179 m3/h.The gas’s absolute emission is 10.78m3/min,the gas’s contrast emission is 11.35m3/t. This is very dangerous, this mine is prophecied as high prominent gas. The coal-dust has explosion hazard, the seam doesn’t have spontaneous combustion tendency. The spontaneous combustion is appraised for three kinds. The field is4.5km long along the east-west direction and is .8~2.1km width along the south-north direction. The area is 9 square .The designed field’s mining is 3032million ton. The designed annual is 0.45Mt, and it will serve for 51a. This mine uses two level to climb the mountain .It’s ways to prepare is using the area of the mine .In the area of the mine, the method of mining is using walking toward the long wall .The method of manage the roof is using collapse. In the front period of the mine uses the central paratactic type to ventilate. This preliminary design is mainly for the Pioneering way , prepare types, mining types. This design also chooses the model of the transportation system, ventilation system, drainage systemact. And, it also describes the production process of every system in the mine. This design explain the relationship and restrict relationship between every production system and every production links. Key words: Vertical Shaft,Tong Chong mine,high gas,two level climb the mountain, the walking toward long wall mining 1