辦公用碎紙機設計【含CAD高清圖紙和說明書所見所得】

【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件，所見才能所得，下載可得到【資源目錄】下的所有文件哦-有疑問可咨詢QQ:1304139763 或 414951605 摘要本設計為辦公室碎紙機的設計。從碎紙機的發展歷史展開，碎紙機共有典型七代，本設計描述碎紙機各代的傳動系統，現在碎紙機的技術已經相當?shù)某墒?。本設計通過對碎紙機性能的分析，讓我們可以更好選擇碎紙機并對其進行較好的保養，同時我們也應該注意到碎紙機工作時會出現的故障，而且我們應該知道怎么排除故障。在關懷生活品質的現今，我們對于產品的環保功能、性能安全方面有了更高的要求。本設計通過比較各傳動的優劣，從而定出本設計的傳動方案，并進行設計校核，力求在設計中做到小體積，低成本，高效率。本次設計為傳動系統的一般設計過程，對今后的設計傳動系統設計有一定參考價值。關鍵詞：碎紙機； 傳動； 齒輪 AbstractThe design for the design of the office shredder. Commence from the development history of the shredder, shredders Total typical six generations, the design described in the paper shredder generation transmission system, shredder technology is already quite mature. Failure will occur when the design through shredders performance analysis, so we can better choose paper shredders and better maintenance, and at the same time we should also be noted that the shredder work, and we should know how troubleshooting. Care for the quality of life today, we have higher requirements for environmental features, performance, safety aspects. By comparing the transmission of the pros and cons of the design, so as to set the transmission scheme design, design verification, and strive to achieve small size, low cost, high efficiency design.The design for the general design process of the transmission system, a certain reference value for the future design of transmission system design.Key words： office shredder transmission gear目 錄摘要 . . . . .IAbstract . . II目錄 . . . . .III第一章.碎紙機的簡介及其發展歷史11.1 簡介11.2 碎紙機的發展歷史3第二章.本設計課題的意義以及設計任務52.1 本課題的研究意義52.2 本設計的主要任務52.3 本設計的設計要求6第三章.傳動系統方案的設計選擇以及具體設計計算73.1三種傳動方案73.2三種方案的優缺點比較與選擇73.3 電機的選擇83.4傳動系統中各軸的轉速以及轉矩計算103.5一級減速級齒輪組的設計計算113.6一級減速齒輪結構設計153.7二級減速級齒輪組的設計計算163.8二級減速齒輪結構設計203.9碎紙刀軸齒輪的設計203.10碎紙軸齒輪結構設計22第四章.軸的設計計算234.1 電機輸出軸234.2一級減速輸出軸的設計234.3 碎紙刀輸入軸24第五章.刀具的選用265.1刀具材料的簡介265.2刀具的選用265.3 刀梳的設計27第六章.工作中常見問題及解決辦法28第七章.碎紙機的使用注意事項及保養29致謝30參考文獻31III