購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載就能得到。。?!咀ⅰ浚篸wg后綴為CAD圖,doc,docx為WORD文檔,有不明白之處,可咨詢Q:1304139763
黑龍江工程學院本科生畢業設計
摘 要
本設計是基于ADAMS/view雙橫臂獨立懸架的仿真與優化,利用ADAMS多體力學軟件建立雙橫臂獨立懸架的多剛體模型,通過對模型中的車輪施加運動約束從而對其進行運動性能的仿真分析,從而獲得該車輪定位角的變化,將其設計要求和分析結果對比,可以得出懸架結構設計的合理性及需要改進的地方。
此外,對雙橫臂獨立懸架做了合理的簡化,建立了雙橫臂獨立懸架力學及虛擬樣機的模型,并在虛擬樣機軟件ADAMS/view模塊上進行仿真,在此基礎上對前懸架的各個參數進行優化設計,使其得到懸架振動達到最優值,從而為設計和改進提供快速、可靠的技術依據,達到大幅度降低設備研制成本,大大降低了輪胎的磨損情況的目的。
關鍵詞:雙橫臂獨立懸架 ;ADAMS ;運動仿真;參數匹配;;虛擬樣機
ABSTRACT
The design is simulation and optimization of double wishbone suspension based on ADAMS/view, we modeling the multi-rigid of Double-wish-bone Independent suspension by using the modtion view ,and then ,start the simulation after constraining the vehicle wheels and we can get the change of the vehicle location angle ,finally,compare the simulation result with the design requirement , we will find whether the tesultment the dement of design which performence should be improved.
Desides ,according to mechincs of vibration and dynamics of multi-body system ,a virtual prototype model of wishbone type independent front suspension was established model, the parameters of front suspension were optimized to minimize the vibration of front suspension. Thus, it provides a quick and reliable technical basis for designing and improveing, reduce cost of equipment developed and purpose of the tyre wear.
Keywords : Double wishbone suspension; ADAMS; Movement Simulation; Matching parameters; Virtual prototype
I