喜歡就充值下載吧。資源目錄里展示的全都有,下載后全都有,圖紙均為高清圖,CAD圖紙可自行編輯,有疑問咨詢QQ:1064457796
塑料圓罩成型工藝與模具設計 摘 要 本設計題目為塑料圓罩成型工藝與模具設計,來源于書籍,體現了典型塑料模的設計要求、內容及方向,有一定的設計意義。通過對該零件模具的設計,進一步加強了設計者塑料模設計的基礎知識,為設計更復雜的塑料模具做好了鋪墊和吸取了更深刻的經驗。本設計運用塑料成型工藝及模具設計的基礎知識,首先分析了塑件的成分及性能要求,為選取澆口的類型做好了準備;然后估算了塑件的體積,便于選取注塑機及確定型腔數量;其次看是否需要側抽,如需要,選擇合適的側抽機構,確定其工作原理;最后分析了塑件的特征,確定模具的設計參數、設計要點及推出裝置的選取。關鍵詞:注塑模 澆口 塑料圓罩成型工藝與模具設計 Plastic molding process and die design of protective coverAbstract: This design topic is cover plastic molding process and mold design protection, from books, reflects the typical plastic mould design requirements, content and direction, the design of a certain significance. Through the design of the die parts, further strengthen the designers of basic knowledge of plastic mold design, paving the way and draw a more profound experience for the plastic mold design more complex. This design using the basic knowledge of plastic molding process and mold design, first analyzes the composition and performance of the plastic parts, ready to select the type of gate; plastic parts and estimated the volume, to select the injection molding machine and determine the number of cavities; secondly whether need to side, if necessary, select the appropriate the side core pulling mechanism, its working principle is determined; finally analyses the characteristics of plastic parts, determination of design parameters, die design and the introduction of the selected devices.Keywords: gate side
鏈接地址:http://m.italysoccerbets.com/article/14502722.html