喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
折頁盒注塑模具設計
摘 要:本設計依據工件圖進行工藝性分析，進而確定了設計方案，計算出模具工作部分的尺寸，設計出工作零部件；然后依據設計要求選擇出各個標準零部件，然后設計出模具的總裝配圖。在設計中，最重要的就是設計方案的確定、坯料的計算和選取以及工作零部件的設計，這是設計的關鍵，這些設計的正確與否直接關系到成本的高低和設計模具能否正常工作。設計過程中首先分析設計任務書中產品二維圖，對產品進行造型設計，然后通過對產品的特征分析確定模具設計的思路。最后根據產品模型，運用UG6.0中Moid Wizard模塊對連接座模具進行設計。
關鍵詞：UG軟件 折頁盒注塑模具設計 工藝性分析
Mold design of Box
Abstract:This text is carry on the craft to analyse according to the work piece picture , and then has confirmed the design plan , calculate out mould work some size , design the job s- pare part; Then choose each standard spare part according to the designing requirement , then design the total installation diagram of the mould . In the design, the important one is sureness of the design plan , calculation and choosing and working the design of the spare part of the blank , this is the key to designing, whether these ones that are designed involve directly or not correctly whether the level of the cost and design mould could worknormally. First the design process analysis and design tasks products 2D map book, the product modeling design, Then the characteristics of the product analysis mold design ideas. Finally, according to product model, which use UG6.0 Moid Wizard module to connect Block mold design. Focus reflects the UG4.0/Moid Wizard module of the application.
Key words : UG software Box mold design craft analysis
II