洗衣機注水盒注塑模設計【CAD】

洗衣機注水盒注塑模設計【CAD】,CAD,洗衣機注水盒注塑模設計【CAD】,洗衣機,注水,注塑,設計 任 務 書 1 背景：注塑成型具有成型周期短、尺寸精確、生產率高等優點，易實現自動化生產。目前生活中90%以上的塑料制品是通過注射成型的。市場前景好、容量大，應用廣。我國的注塑模具起步比較晚，與國外相比有相當大的差距。注射模的基本組成：定模機構、動模機構、澆注系統、導向裝置、頂出機構、冷卻和加熱裝置、排氣系統等。2 內容和要求：1）與課題有關的外文文獻翻譯不少于4000漢字；2）設計說明書的字?jǐn)?shù)不少于20000字；3）畢業答辯圖紙總量不少于3張A0圖紙；4）主要參考文獻不少于15篇。3主要參考文獻：1 夏江梅主編. 塑料成型模具與設備.機械工業出版社，2005.2 張維合主編. 注塑模具設計實用手冊.化學工業出版社，2011.3 張孝民主編. 塑料模具技術.機械工業出版社，2003.4 付偉主編. 注塑模具設計原則、要點及實例解析.機械工業出版社，2010.5 葉久新. 王群主編, 塑料成型工藝及模具設計.機械工業出版社，2008.6 陳萬林等編著.實用塑料注射模設計與制造M.機械工業出版社，2004. 7 伍先明等編著.塑料模具設計指導M.國防工業出版社,2006. 8 張學文、鄭午編著.注塑模設計，化學工業出版社，2007. 9 黃銳編主編.塑料成型工藝學，中國輕工業出版社，2005. 10 齊曉杰主編.塑料成型工藝與模具設計，機械工業出版社，2005. 11 鄒強主編.塑料模具設計參考資料匯編,清華大學出版社，2005. 12 張洪峰主編.塑料模具設計與制造M.北京：高等教育出版社，2008. 13 孫建民主編.基于Pro/E的塑料模具設計研究J.現代塑料加工應用，2006. 14 蔡于紅.塑料轉葉零件模具設計與制造J.模具技術，2007. 15 S.H.Tang.The use of Taguchi method in the design of plastic injection mould for reducing warpageJ.Journal of materials processing technology ,2007. 16 Tsan Jou.A Web-based model for developing:A mold base design systemJ.Expert Systems with applications,2009.4 進度計劃(以周為單位)：第1、2周 調研實習，查閱文獻，整理收集資料。明確課題任務，完成開題報告和外文翻譯；第3、4周 對塑件進行工藝性分析、選擇注塑機、理解注射工藝參數，確定分型面、型腔的數目、型腔型芯的確定，選擇合適的模架、設計澆注系統，確定脫模方式，確定冷卻系統；第5-10周 繪制裝配圖和零件圖；第11、12周 編寫設計說明書，撰寫畢業論文；第13周整理設計資料，完善并提交設計成果，準備答辯。教研室審查意見： 室主任簽名： 年 月 日學院審查意見：教學院長簽名： 年 月 日 開題報告課題名稱洗衣機注水盒注塑模設計課題來源社會生產實踐課題類型B.工程設計類1選題的背景及意義：注塑成型具有成型周期短、尺寸精確、生產率高等優點，易實現自動化生產。目前生活中90%以上的塑料制品是通過注射成型的。市場前景好、容量大，應用廣。我國的注塑模具起步比較晚，與國外相比有相當大的差距。注射模的基本組成：定模機構、動模機構、澆注系統、導向裝置、頂出機構、冷卻和加熱裝置、排氣系統等。另外中國作為發展中國家，具有生產發展水平較低，勞動力資源豐富，生產成本低廉及市場前景廣闊等一般發展中國家同樣的一些特點，但中國人均GDP己超過2000美元，同時還具有相當雄厚的技術和工業基礎，人們聰慧、勤勞、靈巧和改革開放良好環境等一些特殊的特點，這些特點很適合發展模具工業，可以預設，不遠的將來，我國將成為世界最大的制造中心，這給我國的模具行業提供了前所未有的發展機遇。因此，加快高技術設備如數控加工、快速制模特種加工在模具行業的應用，加大新興CAM/CAM技術在模具設計與制造中的應用比例，加速模具新結構、新工藝、性材料的研究和強化模具高級技術人員的培養，已成為我國模具行業再上一個新臺階的關鍵。當然對于我本身，選擇注射模具作為畢業設計題目，也有很多積極的意義。首先模具設計還是屬于機械學科領域，完成一整套的注射模具設計必然能夠鞏固并且拓展自己的專業知識。第二的話，對于熟練應用各類工程軟件有著莫大的幫助，例如AUTOCAD和PROE等。第三，畢業設計是相對獨立的一次任務，對于自我各個方面都會有所提高。第四，畢業之際，也就是事業生涯的開始，有利于開闊工作視野，了解生產實情。2研究?jī)?nèi)容擬解決的主要問題：畢業設計的主要內容：分析塑料制品的工藝性，選擇注塑機并校核，確定分型面及型腔數目，設計型腔型芯的形狀并計算模板的厚度，設計流道系統和推出機構，設計模具的冷卻系統，選擇模架、模具零件的制造。畢業設計的要求：1）與課題有關的外文文獻翻譯不少于4000漢字；2）設計說明書的字?jǐn)?shù)不少于20000字；3）畢業答辯圖紙總量不少于3張A0圖紙，其中包括計算機輔助繪圖的工作量；4）主要參考文獻不少于15篇（包括2篇以上外文文獻）。3研究方法技術路線：1. 明確塑件設計要求仔細閱讀塑件制品零件圖，從制品的塑料品種，塑件形狀，尺寸精度，表面粗糙度等各方面考慮注塑成型工藝的可行性和經濟性。2. 運用PROE及CAD軟件完成模具設計。分型面應選在塑件外形最大輪廓處。滿足塑件的外觀質量要求:注塑時分型面處不可避免地要在塑件上留下溢料或拼合縫的痕跡，因此分型面最好不要選在塑件光亮的外表面或帶圓弧的轉角處。其中分模是最重要的一環。3. 模具總體尺寸的確定，選購模架模架已逐漸標準化，根據生產廠家提供的模架圖冊，選定模架，在以上模具零部件設計基礎上初步繪出模具的完整結構圖。4. 模具結構總裝圖和零件工作圖的繪制模具總圖繪制必須符合機械制圖國家標準，其畫法與一般機械圖畫法原則上沒有區別，只是為了更清楚地表達模具中成型制品的形狀，澆口位置的設置，在模具總圖的俯視圖上，可將定模拿掉，而只畫動模部分的俯視圖。模具總裝圖應該包括必要尺寸，如模具閉合尺寸，外形尺寸，特征尺寸（與注塑機配合的定位環尺寸），裝配尺寸，極限尺寸（活動零件移動起止點）及技術條件，編寫零件明細表等。通常主要工作零件加工周期較長，加工精度較高，因此應首先認真繪制，而其余零部件應盡量采用標準件。4研究的總體安排和進度計劃：第1、2周 調研實習，查閱文獻，整理收集資料。明確課題任務，完成開題報告和外文翻譯；第3、4周 對塑件進行工藝性分析、選擇注塑機、理解注射工藝參數，確定分型面、型腔的數目、型腔型芯的確定，選擇合適的模架、設計澆注系統，確定脫模方式，確定冷卻系統；第5-10周 繪制裝配圖和零件圖；第11、12周 編寫設計說明書，撰寫畢業論文；第13周整理設計資料，完善并提交設計成果，準備答辯。5主要參考文獻：1 夏江梅主編. 塑料成型模具與設備.機械工業出版社，2005.2 張維合主編. 注塑模具設計實用手冊.化學工業出版社，2011.3 張孝民主編. 塑料模具技術.機械工業出版社，2003.4 付偉主編. 注塑模具設計原則、要點及實例解析.機械工業出版社，2010.5 葉久新. 王群主編, 塑料成型工藝及模具設計.機械工業出版社，2008.6 陳萬林等編著.實用塑料注射模設計與制造M.機械工業出版社，2004. 7 伍先明等編著.塑料模具設計指導M.國防工業出版社,2006. 8 張學文、鄭午編著.注塑模設計，化學工業出版社，2007. 9 黃銳編主編.塑料成型工藝學，中國輕工業出版社，2005. 10 齊曉杰主編.塑料成型工藝與模具設計，機械工業出版社，2005. 11 鄒強主編.塑料模具設計參考資料匯編,清華大學出版社，2005. 12 張洪峰主編.塑料模具設計與制造M.北京：高等教育出版社，2008. 13 孫建民主編.基于Pro/E的塑料模具設計研究J.現代塑料加工應用，2006. 14 蔡于紅.塑料轉葉零件模具設計與制造J.模具技術，2007. 15 S.H.Tang.The use of Taguchi method in the design of plastic injection mould for reducing warpageJ.Journal of materials processing technology ,2007. 16 Tsan Jou.A Web-based model for developing:A mold base design systemJ.Expert Systems with applications,2009.指導教師意見：對“文獻綜述”的評語： 內容豐富對總體安排和進度計劃的評語： 進度合理 指導教師簽名： 2018年 3 月 16 日教研室意見： 通過，同意開題 教研室主任簽名： 2018 年 3 月 19 日學院意見： 教學院長簽名： 年 月 日8 徐州工程學院 班級：班級：姓名：姓名：學號：學號：指導老師：指導老師：2018-5-29123 研究背景研究目標研究問題4成型方法中最常采用的是注塑模設計。在工業成型方法中最常采用的是注塑模設計。在工業生產中，占很重要的地位。生產中，占很重要的地位。解決以往模具設計中遇到的問題；對注塑模解決以往模具設計中遇到的問題；對注塑模有關知識做更深入研究。有關知識做更深入研究。注塑機校核、分型面的選擇以及型芯，型腔注塑機校核、分型面的選擇以及型芯，型腔的形狀等。的形狀等。2018-5-29 研究意義研究注塑模具，對了解塑料產品的生產過程和研究注塑模具，對了解塑料產品的生產過程和提高產品質量有很大的意義。提高產品質量有很大的意義。1塑件的工藝性分析名稱：洗衣機注水盒名稱：洗衣機注水盒材料：聚丙烯（材料：聚丙烯（PPPP）技術要求：塑件不得有影響外觀技術要求：塑件不得有影響外觀的缺陷飛邊、毛刺、縮影等熔接的缺陷飛邊、毛刺、縮影等熔接痕，表面粗糙度痕，表面粗糙度RaRa均在均在0.02m0.02m，拔模斜度為拔模斜度為1 1。結構工藝性：為了便于產品從注結構工藝性：為了便于產品從注射機中順利的開模或脫模，才會射機中順利的開模或脫模，才會將產品制成了一個具有斜度的零將產品制成了一個具有斜度的零件，拔模斜度為件，拔模斜度為1 1。10/11/2022塑件三維圖2模具結構設計分型面的選擇原則：1、為了脫模方便，塑件在開模后要留在動模上；2、選擇在塑件的最大輪廓處；3、分型面的痕跡不影響塑件的外觀；4、分型面選擇要有利于排氣。型腔數目的確定：塑件的投影面積不大，但是具有較復雜的三側邊抽芯機構，所以采用一模一腔的結構。模架的選擇：標準模架 注水盒分型面的選擇 10/11/2022上模板上模板下模板下模板導導柱柱導導套套300 x290 x30300 x290 x2522x18226x116模具外型尺寸模具外型尺寸300 x290 x357mm 模架的尺寸3注塑機型號的選擇注塑機它是將熱塑性塑料或熱固性塑料利用塑料成型模具制成各種形狀的塑料制品的主要成型設備。它的主要結構：由注射裝置、合模結構、頂出裝置、機械和液壓傳動以及電氣控制系統等組成。10/11/2022F(3010628 mm)/1000=625.7KN鎖模力鎖模力注塑機的最大開模行程注塑機的最大開模行程單個分型面的下模具開模長度單個分型面的下模具開模長度根據綜合評定，根據綜合評定，選用的是選用的是HTF150XHTF150X系列的注塑機系列的注塑機.4設計澆注系統 按照常規來說，澆口的截面尺寸宜小不宜大，可先確定的小一些，然后在試模時，根據對型腔的充填情況再進行修正。主澆道為直接與注射機的連接部分。主澆道截面為圓形，整體為圓錐體。主澆道為一圓錐孔，其小頭正對注射機的噴嘴。因噴嘴外形為球面，所以主澆道小頭孔端的外形應為一凹球面。選用的是直接澆口。其結構形式如下圖所示：10/11/20225型芯和型腔的形成確定工件的尺寸是：確定工件的尺寸是：，接著依據分型面的位置來分模?？冀又罁?jù)分型面的位置來分模。考慮到產品的一些結構問題，將型芯做成了鑲嵌式，而型腔則做成了整體式的型腔。慮到產品的一些結構問題，將型芯做成了鑲嵌式，而型腔則做成了整體式的型腔。凹模的大小是凹模的大小是 ，凸模的尺寸是凸模的尺寸是 。10/11/2022上模（型腔）實體分模圖下模（型芯）實體分模圖6導向機構設計1.1.導柱、導套的設計導柱、導套的設計在定模板、動模板之間，上、下頂板在定模板、動模板之間，上、下頂板之間各設置之間各設置4 4根導柱，各有導套與之配根導柱，各有導套與之配合。合。2.2.導柱與導套均使用常用的形式導柱與導套均使用常用的形式3.3.導柱和導套使用的是導柱和導套使用的是H7/f6H7/f6的配合，的配合，屬于間隙配合；導柱和安裝孔之間使屬于間隙配合；導柱和安裝孔之間使用的是用的是H7/m6H7/m6配合，屬于過渡配合。配合，屬于過渡配合。10/11/2022導柱結構導柱結構導套結構導套結構7冷卻系統的設計10/11/20221.冷卻水孔的直徑可以根據經驗得到，由模具寬度及塑件厚度。我選擇冷卻水道的直徑D=6mm。2.本次設計使用的是串聯方式的水道，而且是外接直通型的。這種類型的水道結構簡單便捷，而且可以在第一時間發現水道是否被堵塞。3.冷卻水道的布局見右圖。由于塑料的不同，它們的性能和成型工藝也不同，模具溫度要求也不同，設計冷卻系統的時候就是要保證塑件的表面質量，盡量不讓塑件變形，把工藝時間縮短?？偨Y(jié)PPT模板下載： 通過這次畢業設計，讓我正確的認識到模具的每個零件的結構和作用，設計出一套完整的模具。（1）利用UG軟件畫出三維立體圖；（2）分析塑件，選擇合適的材料，分型面以及型芯型腔等建立；（3）選擇適合的模架，增加澆注和冷卻系統等；（4）在各個板塊上加上螺釘?shù)裙潭?，完成裝配圖和零件圖。10/11/202210/11/2022 轉子系統在注塑模具設計中的橢圓截面形狀摘要本文介紹了注射成型工藝模具設計中流道系統的一種新的橫截面形狀。新幾何結構的目標是減少?gòu)U料，縮短周期時間，并減輕模具工具的流道系統彈出。針對兩個厚度為1mm的圓形平板，提出了具有不同比例的橢圓橫截面形狀。 SolidWorks Plastic采用有限元法（FEM）來模擬注塑零件。 SolidWorks Plastic分析了注塑成型過程中塑料零件的短缺缺陷，以驗證新建議的幾何結構。對新的幾何結構進行了聚丙烯圓形平板注射成型工藝的實驗研究。所選擇的輸入機器參數是填充時間，熔體溫度，模具溫度，壓力保持時間和純冷卻時間。研究結果顯示，與新的幾何形狀相比，沒有短路缺陷，與圓形截面相比，廢鋼和冷卻時間分別顯著減少25和2.5。流道系統與模具壁的接觸表面的減少也改善了流道系統從模腔排出的容易性。這項研究的貢獻是設計冷流道系統的新幾何結構，以減少?gòu)U料，循環時間，并提供注射成型中流道系統的簡單排出。關鍵詞 注塑工藝；模具設計；澆道幾何形狀；短缺缺陷介紹在過去的一個世紀里，塑料的迅速增長及其在所有市場的擴散。根據世界原料重量的消耗，塑料是最高的與其他舊材料，如鋁，鋼，橡膠，銅和鋅相比。它是由塑料的特殊性能和較低的生產成本造成的1,2。注塑是制造塑料制品最重要的工藝之一，大約三分之一的塑料通過注塑成型轉化為零件3。注塑成型工藝在包裝，航空航天，建筑，汽車零部件，家居用品等行業的應用越來越廣泛1，3，4。注塑件的質量取決于材料特性，模具設計和工藝條件4-7。注塑成型的三個基本操作是：（1）將塑料顆粒轉化為熔體; （2）將熔融塑料通過澆口，流道和澆口系統注入模具型腔或型腔中，（3）打開模具將部件推出模腔1，8，9。決定注入部件最終質量的因素之一是澆口系統，它是澆口和澆口之間的連接線10。轉輪系統的主要目的是將熔融塑料從澆口轉移到澆口11,12。在冷流道系統中，廢鋼的主要來源是去水后來自澆道和澆口系統的廢料。因此，評估跑步者系統設計的不同規則以證明跑步者系統在注射中的重要性（a）較小的轉輪尺寸以最小化廢品; （b）容易從模具中取出并從模制部件上取下; （c）用最小的凹痕和焊縫快速填充模腔13-16。轉輪系統設計的三個基本因素是橫截面形狀，直徑和腔體布局13。七種類型的橫截面形狀可用于不同應用的轉輪系統13,14,17（圖1）。根據要求，選擇不同類型的轉輪橫截面18。圖1不同的流道橫截面形狀本文的貢獻在于為轉輪系統定義橢圓形或半橢圓形幾何形狀作為一種有效的橫截面形狀，針對較小的轉輪尺寸將廢料與圓形相比減少到最小，從而減少注射的總周期時間和噴射來自模具的零件更容易。此外，在這項研究中，已經檢測到與轉輪系統的過程參數和新幾何形狀有關的顯著現象，這將在另一篇論文中提出。本文介紹了轉輪系統的橢圓形橫截面形狀的設計標準，并考慮了轉輪系統的圓形和半橢圓形之間的比較。對作者而言，有許多論文研究了注射成型的工藝參數和材料特性，其中一些包括澆道，澆口和澆口，但就作者的最佳知識而言，沒有參考分析和模擬橢圓轉輪系統的橫截面形狀。根據注入部件的尺寸和幾何形狀進行流道和澆口系統的設計。然后，通過SolidWorks設計帶澆道和澆口系統的注塑零件。為了準確模擬結果，采用了SolidWorks Plastic中的有限元法（FEM）。最后，為了驗證模型，對兩個圓形注射板進行了實驗方法。轉輪系統的橫截面形狀澆道系統的主要目的是通過澆口將熔融塑料從澆道轉移到所有模腔。流道系統有不同的橫截面形狀，每個都有不同的應用11,17（圖1）。設計師應該評估不同的因素，為特定產品選擇合適的澆道系統幾何形狀。用于雙板模具的最流行的形狀也是最高效率的圓形。對于三板模具工具，如果澆道僅在模具的一半中制造，則梯形和改型梯形是最佳選擇，但仍然不能接受，因?yàn)闈部诓荒芘c中心線一致流動流14。由于尖角，從矩形，正方形和多邊形形狀的腔體中彈出流道系統是具有挑戰性的。如果設計人員無法確定所需流道系統的適當橫截面形狀及其尺寸，則會導致壓力下降，導致模腔不完全填充以及高度向模具壁傳遞熱量13,17,19。因此，可以考慮流道系統的各種橫截面積來調節通向更好注入部分的流動。最后，形狀以及通道的長度對于實現最佳流動是重要的，因此具有較少缺陷的最佳產品20。具有橢圓橫截面形狀的流道系統在注射成型中，流道系統最常見的橫截面形狀是圓形。在選擇特定零件設計的圓形時，三個主要因素是（a）較小的流道尺寸以最小化廢料；（b）容易從模具中彈出；（c）以最小凹痕，焊縫和短射線快速填充模腔13-15。這里的目的是研究一種新的幾何形狀的流道系統，這種流道系統可以產生最少的廢料，與澆口的中心流動流線對齊，適當填充模腔，并且便于將模具從模具中彈出。為此目的，正在研究橢圓形或半橢圓形橫截面形狀，并與圓形橫截面形狀的流道系統進行了精確比較。為了證明跑步者的橢圓橫截面形狀的重要性，對跑步者系統的其他幾何形狀的評估是必要的。這兩者的最佳現有比較是矩形和方形。矩形是一種寬度不同的正方形。在寬度方面，矩形澆道系統的尺寸與正方形澆道系統的尺寸相比有三種不同的比率17（圖2）。根據不同的應用，選擇不同寬度比的矩形流道系統。長方形形狀的優點是減少了轉輪系統的廢料，并且更容易從模具中取出。壓降是通過減小方形寬度而發生的這種幾何形狀的缺點之一17。圓和橢圓之間的比較與正方形和矩形的比較相似。如圖3所示，D是圓的直徑，a是長軸長度，b是橢圓的短軸長度。根據不同的工業應用，主軸長度是固定的，短軸長度是不同的速率（圖3）。因?yàn)檫@會導致廢料的進一步減少，更容易將部件從模腔中排出，并進一步減少循環時間。對于不同的部分，這個因素將會改變。因此，提出不同的b比例取決于零件設計的諸多因素，如尺寸和厚度。圖2 轉輪系統的正方形和矩形形狀之間的比較圖3轉輪系統的圓形和橢圓形狀之間的比較橢圓形轉輪系統的優點如下：1.廢品減量：轉輪和門系統的大小和體積是產品廢品的根本原因。 因此，與圓跑者相比，橢圓跑步者導致更少的報廢。2.從模腔：橢圓形流道系統中，部分射出更加容易，冷卻后與圓形相比，與模具壁接觸的表面更少，從而更容易將注射部件從模腔中排出。3.縮短循環時間：橢圓流道所需熔融塑料量較少; 因此包括注入和冷卻階段時間的循環時間將減少。與亞軍系統的門的中央流程流。 橢圓流道具有中心流動流，其中大部分澆口設計減少了熔融塑料至腔體的湍流。模擬在為這個應用程序設計兩個圓形零件作為兩個樣品之后，下一步是通過SolidWorks Plastic來模擬零件。對于模擬，需要定義注射系統。因此，應考慮考慮事先計算來設計澆道，澆道和澆口系統（圖4）。設計橢圓截面形狀的比例為0.7b。為確保分析結果的準確性，F(xiàn)EM將在模擬中發揮重要作用。根據樣品的幾何形狀，將選擇有限元的三角形形狀（圖5）。用于此模擬的選定材料是聚丙烯（PP）。對表面網格和表面網格的不同三角形尺寸評估不同的尺寸，為注入部分選擇1毫米的三角形尺寸。對于包括澆口，流道和澆口的注射系統，考慮更小的尺寸。它是由注射系統的靈敏度作為此模擬的關鍵區域而產生的。因此，澆道和澆道的三角形尺寸分別為0.3mm和澆口的三角形尺寸分別為橢圓形和圓形橫截面形狀。網格的精度通過網格細化研究來確定。對于直徑為100毫米的兩個圓形部件，澆道和澆口總長度為28毫米。此外，澆道的長度為60毫米，拔模角度為1.5。圖4澆口，流道和澆口系統的注射樣品圖5 轉輪橢圓橫截面形狀的FEA圖6 用橢圓交叉容易填充注射部分下一步是設置適當?shù)墓に噮?shù)。根據所選用的材料和注塑機進行該模擬，填充時間為0.59秒，熔體溫度為230，模具溫度為50，保壓時間為2.04秒，純冷卻時間3.9秒。如前所述，包括澆道，澆道和澆口的注射系統的幾何形狀和尺寸對操作循環時間，冷卻時間以及不同的缺陷（如凹痕，短射等）具有顯著影響25。在運行模擬之后，根據新的幾何形狀和尺寸檢查新的流道系統的可接受性。檢查的主要因素包括易于填充，填充時間分析和匯痕分析;并在注射結束時注射壓力。如圖6所示，橢圓形橫截面的容易填充是處于最可接受水平的綠色區域。注塑成型中的一個常見缺陷是如果流動距離較長，將發生在薄壁或遠離澆口的短射26。根據模擬結果，該部分可以成功填充，甚至如圖7a所示的橢圓截面的填充時間低于流道的圓形截面形狀的填充時間（圖7b）。圖7 a橢圓形橫截面的填充時間，b圓形橫截面的填充時間圖8 a橢圓截面的流動前沿中心溫度，b圓形截面的流動前沿中心溫度防止噴射部件短射的另一個因素是評估流動前沿中心溫度，該溫度代表注入部件每個區域的流動前沿溫度。根據模擬結果，注射部件的每個區域的流動前端中心溫度對于轉輪的橢圓橫截面形狀為230.15C（圖8a）。流道的圓形橫截面形狀的模擬結果是相同的（圖8b）。這意味著橢圓形橫截面形狀的轉子在腔內短射的可能性很低。評估澆道和澆口系統合適尺寸所需的最重要因素之一是注射壓力。根據模擬，這部分可以成功注入壓力42.1MPa。注射壓力小于滿足最大注射壓力極限的66（圖9）。圓形截面的注射壓力為39.6 MPa，接近橢圓形截面。實驗裝置使用商用注塑顆粒聚丙烯（PP）制造兩個圓形板，其具有100mm直徑和1mm厚度。 所選材料的聚合物材料參數列于表2中。用于制造模具的機器有鉆孔機，數控銑床和磨床。 實驗采用全電動臥式注塑機-Poolad-Bch系列。圖9 澆道系統的圓形和橢圓形橫截面形狀的注射壓力表2 材料屬性PP熔體溫度230最高熔化溫度280最低熔融溫度200Mod溫度50熔體流動速率20厘米3/10分鐘最大剪切應力250,000 pa模具設計模具制造有不同的設計概念。在這項研究中，選擇了雙板模具，該模具具有一個帶有雙腔的分模線和一個供料系統并且沒有頂針。模具由碳鋼CK45制成，表面硬度為56 HRC。磨削后的橢圓形橫澆道，澆口系統和澆口襯套分配到模腔板中（圖10a）。還展示了磨削前帶有導桿的型腔板（圖10b）。在設計模具時，另一個要素是導致塑料部件固化的冷卻系統?；谒芰喜考膸缀涡螤?，冷卻系統的設計是不同的。因此，選擇腔板冷卻系統的圓形幾何形狀（圖11）。制造模具時要考慮的另一個因素是通風孔。它們的功能是在關閉模具之后從模腔中釋放空氣；否則如果空氣被困在模具內，會發生短射擊。兩個腔體在腔板的左側和右側具有單獨的通氣孔（圖12）。圖10磨削后具有橢圓橫截面的空腔板，b磨削之前具有橢圓橫截面的空腔盤圖11模腔板內的冷卻系統，用于注入部件的凝固圖12 通風孔避免注入部件的空氣陷阱實驗結果根據不同的工藝參數設置模具和注塑機后，從制造過程的不同角度評估流道系統新的橫截面形狀是本實驗的目標。為了確保本研究橢圓截面轉輪的有效性，需要實施基于不同工藝參數的填充腔體和注射過程的顯著性測試。短射擊分析的結果（圖13）顯示，具有新的流道橫截面形狀的兩個腔體被適當?shù)靥畛?。?dāng)注入壓力高于最大入口壓力并且注入時間高于注入機器的輸入時，會發生短射擊。這些實驗中最重要的部分是，與圖14所示的模擬結果相比，即使在較低的入口壓力和填充時間下，腔體也能夠正確填充。模擬和實驗結果的比較顯示在表4中。表4中的百分比變化預測和實際的入口壓力和填充時間結果分別為7.36和3.38，這證明了轉輪系統的新幾何結構的穩健性。通過定義轉輪系統的新幾何形狀，這項研究的新穎之處在于減少?gòu)U料和冷卻時間，并且實現從腔體中最終注射部件的更容易的噴射。因此，就廢品率和冷卻時間而言，需要在圓形和橢圓形橫截面之間進行比較。表5顯示了對于100,000個注射部件的流道系統的圓形和橢圓形橫截面的廢料率和冷卻時間。圓形橫截面的冷卻時間為每次注射4 s，橢圓截面每次注射3.9 s。與圓形橫截面相比，橢圓形橫截面的廢鋼和鋁合金減少了25，注入部件的冷卻時間為2.5。圖13 最后注射部分具有橢圓形流道橫截面形狀圖14 橢圓跑步者的每個因素水平較低的注射部位結論冷流道系統注塑廢料的主要原因是由澆口，流道和澆口系統組成的供料系統。跑步者對于不同的應用具有不同的橫截面。本文介紹了橢圓形橫截面與圓形橫截面比較的流道系統新幾何的成功開發。這種幾何形狀是通過模擬和實驗開發的，以生產兩個1mm厚的圓形板。工藝參數為填充時間，熔體溫度，模具溫度，壓力保持時間和純冷卻時間。為了驗證模型，進行了實驗測試。預測和實際結果的入口壓力和填充時間的百分比變化分別為7.36和3.38。結果證明了轉輪系統的新幾何結構的穩健性。與圓形橫截面相比，橢圓形橫截面對于注射部件具有25的廢料減少和2.5的冷卻時間。模擬和實驗測試的結果表明，橢圓形截面形狀是一種有效的幾何形狀，可以減少?gòu)U料和總循環時間，并且還可以使模制件更容易從模腔中彈出。模具設計的進一步研究將為設計師和模具制造商創造更具包容性和適當?shù)闹笇?dǎo)方針。參考文獻1 Zhou H (2013) Computer modeling for injection molding. Wiley, Hoboken2 Salimi A, Subas M, Buldu L, Karatas C (2013) Prediction of flow length in injection molding for engineering plastics by fuzzy logic under different processing conditions. Iran Polym J 22(1):33413 Tang SH, Kong YM, Sapuan SM, Samin R, Sulaiman S (2006) Design and thermal analysis of plasticinjection mould. J Mater Process Technol 171(2):2592674 Altan M (2010) Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods. Mater Des 31(1):5996045Khoshooee N, Coates PD (1998) Application of the Taguchi method for consistent polymer melt production in injection moulding. Proc Inst Mech Eng Part B J Eng Manuf 212(8):6116206Ni S (2002) Reducing shrinkage and warpage for printer parts by injection molding simulation analysis. J Inject Molding Technol 6(3):1771867Mok CK, Chin KS, Ho JKL (2001) An interactive knowledge-based CAD system for mould design in injection moulding processes. Int J Adv Manuf Technol 17:27388Dai W, Liu P, Wang X (2002) An improved mold pin gate and its flow pattern in the cavity. J Inject Molding Technol 6(2):1159Hassan H, Regnier N, Pujos C, Arquis E, Defaye G (2010) Modeling the effect of cooling system on the shrinkage and temperature of the polymer by injection molding. Appl Therm Eng 30(13):1547155710 Tsai KM (2013) Runner design to improve quality of plastic optical lens. Int J Adv Manuf Technol 66(14):52353611Zhen-Yong Z, Zheng-Chao G, Jiao-Ying S (2000) Research on integrated design techniques for injection mold runner system. J Comput Aided Des Comput Graph 12(1):61012 Bejgerowski W, Gupta SK (2011) Runner optimization for in-mold assembly of multi-material compliant mechanisms. In: Proceedings of the ASME Design Engineering Technical Conference. 13 Jones P (2008) The mould design guide. Smithers Rapra Technology14 Goodship V (ed) (2004) ARBURG practical guide to injection moulding. iSmithers Rapra Publishing15 Calhoun DAR, Golmanavich J (2002) Plastics technicians toolbox-extrusion-fundamental skills and polymerscience. Ron Jon, Addison16 Zhang Y, Deng YM, Sun BS (2009) Injection molding warpage optimization based on a mode- pursuing sampling method. Polym-Plast Technol Eng 48(7):76777417Pye RGWte (1989) Injection mould design: a textbook for the novice and a design manual for the thermoplastice industry. Longman Scientific & Technical, Harlow12Int J Plast Technol (December 2016) 20(2):249264263DOI 10.1007/s12588-016-9153-4Elliptical cross sectional shape of runner system in injection mold designMehdi Moayyedian1 Kazem Abhary1 Romeo Marian1Received: 3 June 2015 / Accepted: 21 July 2016 / Published online: 27 July 2016 Central Institute of Plastics Engineering & Technology 2016Abstract This paper presents a new cross sectional shape of the runner system in the mold design of the injection molding process. The aim of the new geometry is to reduce scrap, cycle time and ease the ejection of runner system from mold tools. An elliptical cross sectional shape of runner with different ratios was proposed for two circular flat plates with thickness 1 mm. Finite element method (FEM) is employed in SolidWorks Plastic for simulation of the injected part. Short shot defect in the plastic part during the injection molding process is analyzed by SolidWorks Plastic to validate the new proposed geometry. An experimental study of the injection molding process of polypropylene circular flat plates is conducted for the new geometry. The input machine parameters selected are filling time, melt temperature, mold temperature, pressure holding time, and pure cooling time. The research outcomes show no short shot defect associated with the new geometry and also significant 25 and 2.5 % reduction in scrap and cooling time respectively compared to round cross sections. Reduction in contact surface of the runner system with mold walls improved the ease of ejection of runner system out of the cavity as well. The contribution of this study is to design a new geometry of a cold runner system to reduce scrap, cycle time and also provide easy ejection of runner system in the injection molding.Keywords Injection molding process Mold design Runner geometry Short shot defects& Mehdi Moayyedian mehdi.moayyedianunisa.edu.au1School of Engineering, University of South Australia, Mawson Lakes Campus, Adelaide, SA 5095, AustraliaIntroductionThe past century has observed the rapid increase of plastics and their proliferation into all markets. According to world consumption of raw materials by weight, plastic is the highest in comparison with other old materials such as aluminum, steel, rubber, copper, and zinc. It has resulted from specific properties and lower production cost of plastics 1, 2. Injection molding is one of the most significant processes for manufacturing of plastic products and approximately one-third of all plastics are converted into parts via injection molding 3. The application of the injection molding process is increasing significantly in many industries like packaging, aerospace and aviation, building and construction, automotive parts, household articles and so on 1, 3, 4. The quality of the injection moldings depends on material characteristics, mold design and process conditions 47. Three fundamental operations in injection molding are: (1) plastic granules are converted into a melt; (2) molten plastic is injected into the mold cavity or cavities under pressure via sprue, runner and gate systems and (3) mold tools are opened to eject the part out of cavity 1, 8, 9.One of the factors which will determine the final quality of injected part is the runner system which is a connection line between sprue and gates 10. The main purpose of the runner system is to transfer molten plastic from sprue to gates 11, 12. In the cold runner system, the main source of scrap is the scrap from runner and gate system after de-gating. Hence, different rules are evaluated for runner system design to demonstrate the significance of runner systems in injectionroundsemicircularsquarerectangularTrapezoidalModied TrapezoidalPolygonFig. 1 Different runner cross sectional shapesmolding such as (a) smaller runner size to minimize the scrap; (b) easy ejection from mold tools and removal from molded part; (c) filling the cavity quickly with minimum sink mark and weld lines 1316. Three fundamental factors in the runner system design are cross sectional shape, diameter and cavity layout 13. Seven types of cross sectional shapes are available for the runner system for different applications 13, 14, 17 (Fig. 1). Depending on the requirements, different types of runner cross sections are selected 18.The contribution of this paper is to define elliptical or semi-elliptical geometry for runner systems as an effective cross sectional shape aiming at smaller runner size to minimize the scrap, in comparison with round shape, to reduce the total cycle time of injection and to eject the part from mold tools more easily. Furthermore, in this research remarkable phenomena related to process parameters and new geometry of runner systems have been detected that will be presented in another paper.The design criteria of elliptical cross sectional shape for runner systems are introduced herein, and a comparison between round shape and semi-elliptical shape of runner system is considered. To the authors best of knowledge, there are many papers studying process parameters and material characteristics of injection molding a few of which include runner, gate, and sprue but, to the authors best of knowledge, there is no reference analyzing and simulating the elliptical cross sectional shape of runner system.The design of runner and gate systems is conducted herein based on the size and geometry of injected parts. Then, the injected part with runner and gate system is designed via SolidWorks. For accurate result of simulation, finite element method (FEM) in SolidWorks Plastic is employed. Finally, to validate the model, experimental method is conducted for two circular injected platesCross sectional shape of runner systemThe main purpose of a runner system is to transfer the molten plastic from sprue to all cavities via the gate. There are different cross sectional shapes for runner systems and each of them have different applications 11, 17 (Fig. 1). The designer should evaluate different factors for selecting the right geometry of the runner system for a specific product. The most popular shape of runner systems for two-plate mold tools, which is also of the highest efficiency, is round shape. For three-plate mold tools, the trapezoidal and modified trapezoidal are the best options if the runner is to be manufactured only in one half of the mold, but still they are not acceptable be- cause the gate cannot be positioned in line with the central flow stream 14. Ejecting a runner system out of cavity with rectangular, square, and polygon shape is challenging due to sharp corners. If a designer cannot determine the appropriate cross sectional shape of the required runner system and their dimensions, pressure drops and leads to incomplete filling of cavities and high level of heat transfer to mold walls 13, 17, 19. Hence, various cross-sectional area of a runner system can be considered to regulate the flow leading to a better injected part. Finally, the shape and the length of the channel are significant for achieving the optimal flow and consequently the best product with less defects 20.Runner systems with elliptical cross sectional shapeIn injection molding, the most common cross sectional shape for runner system is round shape. In selecting the round shape for specific part design, three main elements are (a) smaller runner size to minimize the scrap; (b) easy ejection from mold tools; (c) filling the cavity quickly with minimum sink mark, weld lines and no short shot 1315. The aim herein is to investigate a runner system of new geometry which can lead to minimal scrap, be positioned in line with the central flow stream of gate, properly fill the cavities, and facilitate the easy eject the part from mold tools. For this purpose elliptical or semi-elliptical cross sectional shape has been taken under investigation and accurately compared with runner systems of round cross sectional shape.To demonstrate the significance of elliptical cross sectional shape of runners, the evaluation of other geometries of runner systems is necessary. The best existing comparison of these two is rectangular and square shape. Rectangle is a kind of square with different width. There are three different ratios in designing the dimension of rectangular runner system in comparison with square ones in terms of width 17 (Fig. 2). According to different applications, rectangular runner system with different ratios of width is chosen. The advantages of rectangular shape over square ones are less scrap of runner system and easier ejection from mold tools. Pressure drop is one of the disadvantages of this geometry which happens by decreasing the width of the square 17.The comparison between circle and ellipse is similar to that of square and rectangle. As shown in Fig. 3, D is the diameter of circle, a is major axis length, and b is minor axis length of ellipse. Major axis length is fixed and the minor axis length is of different rates depending on different industrial applications (Fig. 3). As it leads to further reduction in scrap, easier ejection of part out of cavity, and further reduction in cycle time. For different parts, this factor will be changed. Hence,square shaperectangular shape with width ratio 1/2rectangular shape with width ratio 1/4rectangular shape with width ratio 1/6Fig. 2 Comparison between square and rectangular shape of runner systemcircular shapeelliptical shape with b=0.9aelliptical shape with b=0.8aelliptical shape with b=0.7aFig. 3 Comparison between round and elliptical shape of runner systemproposing different ratio of b depends on many factors of part design such as size and thickness.Advantages of an elliptical runner system over a round one are as follows:1. Reduction in scrap: the size and volume of runner and gate system are the root cause of product scrap. Hence an elliptical runner leads to less scrap compared to the round runner.2. Easier ejection of part from cavity: elliptical runner system, after cooling process compared to round shape has less contact surface with mold walls which leads to easier ejection of the injected part from the cavity.3. Cycle time reduction: the elliptical runner requires less amount of molten plastic; hence the cycle time which includes the injection and cooling phase time will be reduced.4. Central flow stream of gate with runner system. Elliptical runner has central flow stream with most of the gate designs which decrease the turbulences of molten plastic to the cavities.SimulationAfter designing two circular parts as two samples for this application, the next step is to simulate the part via SolidWorks Plastic. For the simulation, defining the injection system is needed. Hence, designing the sprue, runner and gate system with consideration of prior calculations should be considered (Fig. 4). The ratio for designing elliptical cross sectional shape is 0.7b.To make sure that the analysis results are sufficiently accurate, FEM will play a significant role in simulation. According to the geometry of samples, the triangle shape for FEM will be selected (Fig. 5). The selected material for this simulation is polypropylene (PP). Different sizes were evaluated for the surface mesh and from different triangle size of surface mesh, the triangle size of 1 mm is chosen for the injected part. For the injection system which includes sprue, runner and gate, smaller sizes are considered. It has resulted from the sensitivity of the injection system as a critical area of this simulation. Hence, triangle sizes of 0.3 mm for sprue and runner and triangle 0.2 mm for gate are selected for both elliptical and round cross sectional shape of runner. The accuracy of the mesh is determined through a mesh refinement study. The runner and gate length in total is 28 mm for two circular parts with diameter of 100 mm. Also, the sprue has 60 mm length with draft angle 1.5.Fig. 4 Samples of injection with sprue, runner and gate systemFig. 5 FEA for elliptical cross sectional shape of runnerFig. 6 Easy filling of injected part with elliptical crossThe next stage is to set up appropriate process parameters. According to the selected material and injection machine for this simulation, filling time is 0.59 s, melt temperature is 230 C, mold temperature is 50 C, pressure holding time is2.04 s, and pure cooling time is 3.9 s. As mentioned before, the geometry and size of the injection system which includes sprue, runner and gate, have significant effects on operation cycle time, cooling time, and different defects such as sink marks, short shot etc. 25. After running the simulation, the new runner system is checked for acceptability in terms of new geometry and size. The main factors checked are ease of fill, filling time analysis, sink mark analysis; and injection pressure at the end of injection. As shown in Fig. 6, ease of fill for the elliptical cross section is the green area which is in the most acceptable level.One common defect in injection molding is short shot which will happen on thin walls or far from the gate if there are long flow distances 26. According to the simulation results, this part can be successfully filled and even the filling time for an elliptical cross section as shown in Fig. 7a is lower than that of for a round cross sectional shape of runner (Fig. 7b).Fig. 7 a Filling time for elliptical cross section, b Filling time for round cross sectionFig. 8 a Flow front central temperature for elliptical cross section, b Flow front central temperature for round cross sectionAnother factor to prevent short shot for the injected part is to evaluate the flow front central temperature which represents the flow front temperature at every region of the injected part. Based on the simulation results, the flow front central temperature in every region of the injected part is 230.15 C for the elliptical cross sectional shape of runner (Fig. 8a). The simulation result for a round cross sectional shape of runner is the same (Fig. 8b). It means that the possibility of short shot in the cavities for an elliptical cross section shape of runner is low.One of the most significant factors which are necessary to evaluate for the determination of the right size of the runner and gate system is the injection pressure. According to the simulation, this part can be successfully filled with injection pressure42.1 MPa. The injection pressure is less than 66 % of the maximum injection pressure limit which is satisfactory (Fig. 9). The injection pressure for a round cross section is39.6 MPa which is close to an elliptical cross section.Experimental set-upA commercial injection molding granule polypropylene (PP) is employed to produce two circular plates which have 100 mm diameter and 1 mm thickness. The polymer-material parameters of selected material are listed in Table 2. Fig. 9 Injection pressure for both round and elliptical cross section shape of runner systemTable 2 Material properties ofPPMelt temperature230 CMax melt temperature280 CMin melt temperature200 CMod temperature50 CMelt flow rate20 cm3/10 minMax shear stress250,000 pa The machines used to fabricate the mold tools are drilling machine, CNC milling machine and grinding machine. Fully electric horizontal-plastic-injection machinePoolad-Bch seriesis employed for the experimentsMold designThere are different design concepts in fabrication of mold tools. In this study, a two-plate mold which has one parting line with double cavities with a feeding system and without an ejector pin is selected. The mold tools are made of steel CK45with surface hardness 56 HRC. The runner with an elliptical cross section, gate system, and sprue bush are allocated in the cavity plate after grinding (Fig. 10a). Also the cavity plate with guide bars before grinding is demonstrated (Fig. 10b).In designing the mold tools, another element is the cooling system which leads to the solidification of plastic part. Based on the geometry of plastic part, the design for the cooling system is vary. Hence, the circular geometry for the cooling system of cavity plate is selected (Fig. 11).Another factor to consider in fabrication of mold tools is the air vents. Their function is to release the air from the cavity after closing the mold tools; otherwise short shot will happen if air is trapped inside the mold. Both cavities have separate air vents at the left and right side of the cavity plate (Fig. 12).Fig. 10 a Cavity plate with elliptical cross section of runner after grinding, b Cavity plate with elliptical cross section of runner before grindingFig. 11 Cooling system in cavity plate for solidification of injected partFig. 12 Air vents to avoid the air trap in injected partsExperimental resultsAfter setting up the mold tools and injection machine based on different process parameters, the evaluation of the new cross sectional shape of the runner system from different aspects in the manufacturing process is the target of this experiment. To ensure the effectiveness of an elliptical cross section of runner in this study, the test for significance of filling the cavities and injection process based on the different process parameters need to be implemented. The result of short shot analysis (Fig. 13) shows that two cavities with the new cross sectional shape of runner are filled properly.When the injection pressure is higher than the maximum inlet pressure and filling time is higher than the input of the injection machine, short shot will happen. The most significant part of these experiments is that the cavities filled properly even with lower inlet pressure and filling time in comparison with simulation results as shown in Fig. 14. The comparison of the simulation and experimental result is shown in Table 4. Percentage change for predicted and actual results of inlet pressure and filling time are 7.36 and 3.38 % respectively which demonstrates the robustness of new geometry of runner system.The novelty of this research by defining the new geometry of the runner system is to reduce scrap and cooling time and achieve easier ejection of final injected part from the cavity. Hence, the comparison between a round and an elliptical cross section in terms of scrap rate and cooling time is necessary. Table 5 demonstrates the scrap rate and cooling time of a round and an elliptical cross section of runner system for 100,000 injected parts. The cooling time for a round cross section is 4 s per injection and for an elliptical cross section 3.9 s per injection. An elliptical cross section in comparison with round cross section has 25 % reduction in scrap and 2.5 % in cooling time for the injected parts.Fig. 13 Final injected part with elliptical cross sectional shape of runnerFig. 14 Injected part with lower level of each factor for an elliptical runnerTable 4 Comparison of simulation and experimental result based on process parametersProcess parameterSimulation resultExperimental resultInlet pressure42.1 MPa39 MPaFilling time0.59 s0.57 sTable 5 Scrap rate and cycle time for the round and elliptical cross sectionFactorRoundEllipticalScrap rate of runner (g)80006000Cooling time (h)111.11108.33ConclusionThe main reason for scrap in injection molding for cold runner system is the feeding system which consists of sprue, runner and gate system. The runner has different cross sections for different applications. This paper presents the successful development of a new geometry of a runner sys