購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
彎曲角小于90°的U形彎曲模運動仿真
摘 要
彎曲是利用金屬的塑性變形，將板料，棒料，型材或管材等按設計要求彎曲成一定曲率和一定角度的零件的一種沖壓工序。由于金屬的流動發生在金屬的塑性變形范圍內，因此當所施加的外力取出后將會保留一個永久性的彎曲變形。
本設計是通過Pro/ENGINEER4.0的PRT模塊和ASM模塊里的動畫功能表現彎曲角小于90°的U形彎曲模模具的工作過程和工作原理。
關鍵詞：沖壓工序 彎曲模 塑性變形 動畫
Bending angle is acute U-bending modulus of precision motion simulation
Abstract
Bending is the use of metal plastic deformation, the sheet metal, bar, profile or pipe bending according to design requirements, such as a certain curvature and to a certain point of view of the parts of a stamping process.Metal flow takes place within the plastic range of the metal,so that the bend retains a permanent set after removal of the applied stress.
The graduated design through the shape Pro/ENGINEER4.0 of PRT and ASM module assembly module in the demo animation feature curved Bending angle is acute U-bending modulus of precision motion simulation process mode, and works.
Keywords: stamping process,Bengding dies, the plastic range, Animation