復點機密封蓋的注射模設計

復點機密封蓋的注射模設計,機密,秘要,注射,設計 南京理工大學泰州科技學院 畢業設計說明書(論文) 作 者: 劉養韜 學 號： 05010126 系　部: 機械工程系 專 業: 機械工程及自動化 題 目: 復點機密封蓋的注射模設計 工程師 殷勁松 指導者： 評閱者： 2009 年 6 月 畢業設計說明書（論文）中文摘要 本論文根據生產實際的需要完成復點機密封蓋的塑料注射模具設計。由于塑料模具零件加工方法、加工工藝及裝配方法都是不同的，所以在選擇側抽芯類型時需要謹慎。根據所設計的產品的具體結構進行分析，該模具采用側抽芯機構。在設計中采用聚丙烯塑料注射而成，成型方式為一模兩腔。本論文確定了所采用塑料的工藝參數和所采用的成型設備，確定了模具制作的總體方案，分析并解決了模具的總體結構和各工作部分的具體結構，并進行了必要的尺寸計算。對分型面、澆注系統等進行了分析設計，完成了模具工程圖設計，最后用Pro/E對模具進行了三維的總裝。使制作出來的產品的質量得到保證。 關鍵詞 注射模具 側抽芯機構 聚丙烯 一模兩腔 畢業設計說明書（論文）外文摘要 Title Injection Mould Design for Bill Counter Closures Abstract In this paper, the bill counter closures plastic injection mould with side core-pulling mechanism is designed basing on practical needs. Processing methold, processing technology and assembling metholds of plastic mould parts are different ,so we need caution while choosing side core-pulling type. Side core-pulling mechanism is used according to specific structure of the products analyze. In this design, the plastic is injected and formed with polypropylene, and there are two cavitives in one mould. This paper include the determination of the technological parametre, formation equipment type, mould manufacturing overall concept, overall structure and the detailed structure of each working parts, essential size calculations, profile and gating systerm analysis design. ProEngineer is used on 3D assembling after mould graphics design finshed, to make sure the good quality of the products. Keywords Inject mould Side core-pulling mechanism Polypropylene Two cavities in one mould