汽車電源插孔板模具設計-注塑模具

喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，圖紙為CAD格式可編輯，【有疑問咨詢QQ:414951605 或 1304139763】 江西理工大學應用科學學院畢業設計 汽車電源插孔板注射模具設計摘要塑料工業是當今世界上增長最快的工業門類之一，而注塑模具是其中發展較快的種類，其在整個模具行業中約占30%，在未來的模具市場中，塑料模具在模具總量中的比例將逐步提高，發展速度將高于其他模具。因此，研究注塑模具對了解塑料產品的生產過程和提高產品質量有很大的意義。本設計主要介紹了汽車電源插孔板注射模具的設計過程和零件的加工過程，包括塑件材料分析，塑件的工藝性分析。而塑件的工藝性分析又包括塑件的使用性能、塑件的結構工藝性分析、塑件的尺寸精度分析和塑件的表面質量。還闡述了成型的基本原理，特別是單分型面注射模具的結構與工作原理，對注塑產品提出了基本的設計原則；詳細介紹了冷流道注射模具澆注系統、溫度調節系統和頂出系統的設計過程，并對模具強度做了說明。此外，還詳細地敘述了模具成型零件包括型腔、型芯的加工工藝。通過本設計，可以對注塑模具有一個初步的認識，注意到設計中的某些細節問題，通過對Pro-E和Auto-CAD的學習，可以建立較簡單零件的零件庫，從而有效地提高工作效率。關鍵詞：模具設計；注塑模具；插孔板；Auto Power Socket Plate Injection Mould Mesign ABSTRACTThe development of plastic industry is one of the most rapidly in the modern world, while the injection mold is the one. It takes about 30 percent among the whole mold trade. In the future of mold market, the proportion of the plastic mold will rise gradually, and the speed of its development will also be more quickly than other molds. Therefore, the research of injection mold has a significance meaning to understand the producing process of the plastic product and to improve the quality of the product.This design mainly introduces the shell of the Covers designing process and processing process of the spare parts. Including plastic material analysis and technology analysis. However, the technological analysis of the plastic contains many aspects, such as the usage of the material, the structure analysis, .the size of the precision and the sacrificial quality of the product. Also it elaborates the elementary principle of shaping mold, especially the structure and working principle of the one side injection mold. It introduces the main designing principle of the product in details; it introduces the cold flow channel injection molds pouring system, temperature control system and the designing procedure of the go-against system, then is the instruction of the molds intensity. In addition, it introduces the spare parts of the shaping mold in details, including the cavity of the mold and the processing technology of the mold core.From this design, we can have a preliminary understanding of the injection mold and notice some particular problems. Through the study of Pro-E and Auto-CAD, it could help us to establish storehouses of some simple components, thus, to improve the working efficiency effectively.Key word：mold design; injection mold; jackplate目錄摘要ABSTRACT緒論11 塑件的工藝性分析21.1 ABS的特性21.1.2ABS性能與應用21.1.3ABS性能參數21.1.4ABS注射成型的主要工藝參數；31.2 ABS的成型特性31.3 塑件的綜合性能41.3.1塑件的尺寸精度分析41.3.2塑件的表面質量分析41.3.3塑件的結構工藝性分析41.4塑件體積的確定41.5塑件質量的確定52 成型零部件工作尺寸的計算62.1定模型腔徑向尺寸的計算62.2型腔深度尺寸的計算72.3型腔徑向尺寸的計算82.4型芯高度尺寸的計算93 模具結構的設計103.1型腔數目的確定及排列103.2分型面的選擇及確定103.3注射機的選擇113.3.1注射量的計算113.3.2注射壓力的計算113.3.3鎖模力的計算113.4澆注系統的設計133.4.1主流道的設計133.4.2分流道的設計143.4.3澆口的設計143.4.4冷料穴的設計153.5模架的選擇163.6側抽機構的設計與計算163.6.1抽芯距的計算173.6.2斜滑塊相關尺寸的計算173.6.3斜銷直徑的計算173.7推出機構的設計193.7.1推件力的計算193.7.2確定推桿位置193.7.3 推桿直徑的確定194 注射機有關參數的校核214.1模具閉合高度的確定及校核214.1.1模具閉合高度的確定214.1.2模具在注射機上的安裝校核214.1.3注射機有關參數的校核214.1.4模具開模行程校核215 冷卻系統的設計225.1體積流量計算225.2冷卻水管道直徑的確定225.3冷卻水管道分布位置的設計226.1模塑成型工藝卡246.2主要零件加工工藝卡256.2.1 型芯的加工工藝卡256.2.2 滑塊的加工工藝卡256.2.3 模板的加工工藝卡25總結28謝辭29參考文獻30附錄A31附錄B38V附錄AFundament Of Injection MoldingInjection molding appearance can have a complex, size precise or with metal embedded parts of the texture MiZhi of plastic products, have been widely applied in defence, electrical, automotive, transportation, building materials, packaging, agriculture, culture, education, health and Peoples Daily life field. For all kinds of plastic injection molding process has good adaptability and high production capacity, and is easy to realize the automation. With the rapid development of industry in plastic injection today, in quantity or species are occupies an important position, thus become the fastest growth in plastic machinery, one of the most number of production cost.Our plastic processing enterprise star ROM the cloth, throughout the country, the technology of equipment, most processing enterprise in different levels of equipment are needed. This machinery industry in China in recent years, the technology progress, especially significant injection technology level and foreign famous brand products, the smaller gap in the control level, product quality and appearance shape etc. Has achieved remarkable difference. Choose domestically-manufactured equipment, with less investment, also can produce and the quality of the product is imported equipment. These for enterprises technological transformation.Must have good products, must have good equipment. The equipment corrosion and abrasion is a kind of natural laws, they have the rule, can prevent or reduce wear and corrosion of the equipment, prolong the use of equipment, to ensure that equipments readiness cycle.In order to strengthen the use of plastic machinery, maintenance and management, China has made relevant departments of the detailed rules for the implementation of the related standards and requirements, the equipment management and production enterprise for equipment management and use it correctly, scientific management, reasonable use lubrication, maintenance, repair and maintenance, the plan regularly to improve equipment, equipment often pipe is in good condition.Plastic injection molding technology is based on die-casting principle from the 19th century at the beginning of the 20th century, is the most widely used in plastics processing method. This applies to all thermoplastics thermosetting plastic parts and plastic volume (1/3).The working principle of injection molding 1.1The working principle and injection of syringe injection with similar, it is with screw (or plunger), will have the thrust plasticizing good melting state (i.e. sticky flow) of plastic injection into the mold cavity, closed good after obtaining the curing finalize the design process of products.The injection molding process is a cycle of each cycle, mainly includes: quantitative charging - molten plastic injection molding pressure - - - and take mold cooling. Remove molded parts again, after closing for the next cycle.The injection of 1.2 structureAccording to the way into the plastic injection machine and piston type machine screw, The transmission way according to the machine can be divided into the hydraulic, mechanical and hydraulic machinery (link) -, According to the operation mode into automatic and semiautomatic, manual machines.(1) the horizontal injection: this is the most common types. The injection mould parts and parts in the same horizontal center, and mould is online along horizontal open. Its features are: fuselage short, easy operation and maintenance, Machine low gravity, installation is more stable, The products can be dropped after the gravity, easy to realize automatic operation. At present, the market with this form. Injection(2) vertical injection mould parts and its injection parts in the vertical center, and mould is along the line perpendicular direction of open. Therefore, the area is lesser, easy, loading and unloading mould was embedded into more convenient, since the material can be a hopper evenly on plastic. But after the products to be taken with the hand, must fall under the realization of automatic operation, easy. Vertical injection molding machine for small anger is in commonly below 60 grams of injection molding machine, large and medium-sized machine unfavorable use.(3) injection mould and the direction, in the same surface boundary, it is particularly suitable for machining center parts are not allowed to leave the plane sprinkle trace. It covers an area smaller than horizontal injection mould, but in the embedded easy. Tilt This type of injection molding machine for small anger.(4) multimode plate-drilling machine: it is a kind of special multistage operation, its characteristic is injection mould device adopts the rotor disc structure, mould around. This type of machine was full of plastic injection unit, can shorten the cycle of production capacity, improve the production ability, thus machine suitable for a long time or finalizes the design was embedded parts and need for more auxiliary time of mass production of plastic products, but for large and complicated mould system, mould device of force, the less often in plastic injection products production application soles.General injection mould device, including injection unit, hydraulic system and electric control system.The basic requirements of injection molding, plastic injection and is forming. Plasticizing is realized, and ensure the quality of products, molding and to meet the requirements of injection molding, must ensure sufficient pressure and speed. At the same time, because of high pressure injection, correspondingly in the cavity of a high pressure (mold cavity pressure in general average 20 45MPa between, see table 1), so there must be large enough to close. Thus, injection mould device is injection unit niv key components. The machine operation. 1.41.4.1 injection programForward - injection nozzle and pressure-keeping plastic shrinkage gets down, cooling and nozzle backward, and open the door closed, and back needle, mould and nozzle.1.4.2 injection machines operate project: project including operating keyboard operate, electric control cabinet operation and hydraulic system operation. Separately, feeding movement injected process action, injection pressure and injection velocity, the type selection, each of the current, voltage and temperature, injection pressure and monitor back pressure adjustment, etc.1.4.2.1 injection process action:Can manual machine commonly, also can with fullautomatic operation.Manual operation is in a production cycle, each movement by the operator is the operation switch clicked. Generally in commissioning moulding-adjustment only choose.Semi-automatic machine can automatically when operating cycle of a job, but each production cycle must be opened after the completion of the operator, the security, the workpiece, again to close the security machine can continue to the next cycle of production.Full-automatic operation in a cycle of injection molding machine, automatic action after entering the next working cycle. In the process of continuous work normally without downtime control and adjustment. But must pay attention to automatic work, such as: (1), do not open the exit, otherwise midway through the automatic interrupt, (2) shall timely charging, (3) if choose electric induction, should pay attention to not hide the exploding close.In fact, in the automatic operation is usually need midway through the temporary shutdown, such as injection mould for machine as softening agent.The normal production, general selection semi-automatic or automatic operation. Operation began when, should according to production needs operating mode (manual, semiautomatic or automatic), and the corresponding clicked manual, semiautomatic or automatic switch.Semi-automatic and automatic working procedure has itself, by lines in electrical counter operators on speed and pressure change the size, length of time and frequency of thimble, not by operators, systematic and make wrong tuning procedures chaos.When a period of adjustment, before the appropriate action should be to choose the manual, confirm every action, then choose normal semi-automatic or automatic operation.1.4.2.2 piasticising actionAccording to the plastic injection advance before feeding, whether the seat back mould injection nozzle is left, general has three choices. (1) (former model fixed feeding: and after always stick into the mold nozzle seat will not move, note. (2) before feeding: nozzle with plastic mould for plastic feeding, gets back seat, note mould. Leave nozzle, Choose this option purpose is: when using plastic mould injection advance against nozzle aperture, avoid grant melting in high pressure from the nozzle flow, plastic mould and nozzle can avoid after long time contact and heat transfer, the influence of the temperature of their relative stability. (3) after charging: after the completion of the injection nozzle seat back, left, and plastic mould, plastic finished gets more seats. The action applies to processing molding temperature, due to the narrow special plastic mould contact with short time of nozzle, avoid the loss of heat, also avoid the melting of the hole in the nozzle.Injection timing, cooling end timer, plastic action after the start. Screw rotation and squeezing plastic melting to screw head ahead. Due to the front of the screw check out of the loop, molten plastic fitting in front of the barrel screw back, forced out. When the screw back into a predetermined location (this position by travel switch control screw back, the distance, realize quantitative charging), plastic stop, stop screw. Then shrinks, pour down shrinkage screw for traces of axial back, this movement can make gathered in the melting of nozzle, overcome the pressure of the pressure cylinder due to internal and external imbalances caused leave saliary phenomenon. If you dont need to pour, should put down to stop switch shrinkage piasticising, make appropriate location on the pressure switch was stopped at the same time, stop switch is also shrinks. When the screw for fall back into action on shrinkage pressure switch to stop, stop shrinkage. Then start back seat note. When the note on the back seat to the pressure switch to stop, stop back seat. If you use fixed way of feeding, should pay attention to adjusting the position of switch trips well.General production adopts fixed way of feeding back seat to save time of operation, injection accelerate production cycle.1.4.2.3 injection pressure selectionThe injection pressure injection by pressure-regulating valve regulated, set in stressful situation, through the high and low voltage control, the fuel injection pressure of late before.Ordinary medium above machine Settings have three choices, namely high pressure, low pressure and low pressure after the first. By injection pressure injection is the high-pressure oil cylinder pressure oil. Due to the high pressure from the start, plastics in high pressure, high condition into the cavity. When the mould plastic injection pressure, injection pressure cylinder rapidly rising fast reading. By injection pressure injection is the low pressure cylinder, oil injection process gauge reading rises slow, plastic at low speed, enter the cavity. After the first high voltage is according to the types of plastic mould and actual requirements from the control of the cylinder pressure oil pressure to achieve.In order to meet different requirements of various plastic injection pressure, also can be used to replace the diameter of piston rod or screw, this method can not only meet the injection pressure, and give full play to the machine production capacity. In large injection with more often for injection pressure and multistage speed control functions, such injection can ensure the quality of products and precision.1.4.2.4 injection speed selectionGeneral control injection are fast - slow knob to meet requirements of injection velocity. In the hydraulic system in a large flow pump and a small flow pump running supply. When the fuel injection, big flow through quickly when opening, rapid injection, when the hydraulic oil provide only small flow injection molding machine, various action is slow.1.4.2.5 top formThe machine has the form of mechanical and hydraulic out two kinds, some are also equipped with pneumatic ejector systems, with a number of single and multiple two kinds. The movement can be manually, also can be automatically.The action is open to stop by the limit switches to start. The operator may according to need, through adjusting control cabinet out time to achieve the button. The speed and the pressure on the switch cabinet can through to control the movement of distance, thimble determined by travel switch.1.4.2.6 temperature controlIn temperature measurement thermocouple temperature sensor for temperature changes with temperature control device, plan as a nitrogen-treated barrel and mould electric conductor, the current ring selectively fixed nitrogen-treated barrel temperature and each mould temperature. 5 lists some plastic molding process temperature range, available for reference.A nitrogen-treated barrel are generally classified into 2 electrothermal circle, three or four control. Electric cabinet of the ammeter respectively show the size of electric current each circle. The readings are fixed, if in reading ammeter is found in the running for a long time, could the low heating circle faults occur, or poor contact wires, or resistanse wire, or a fine oxidation heating circle, all these will make burnt circuit of resistance increases in parallel to the current decline.In the ammeter have readings can also simply use the plastic one heating circle in the wall, see the material with judge a molten or electric circle is energized or burned to the ground.1.4.2.7 mould controlMould is huge mechanical thrust will die to molten plastic injection molding process to withstand the pressure injection mold and die filling and great ZhangKaiLi.Close the switch, each completed exit signals are given, action immediately began. First is to slow start moving template, after a short, pressure switch control rod slow pressure plate, block out by rapid activity forward. In advance to near the end of the mould, the other end of the control lever lever and pressure on the slow switch activity board and turning to slow and with low. In the process of low-pressure mould, if any, between the mold can be successfully closed obstacles to the high voltage switch, turn to unbend machine, high-pressure is close to completion action. This distance extremely short, generally only 0.3 1.0 mm, just turn high-pressure immediately terminated mould was touched when action to stop limit switches, mould process is over. The injection mould structure has full hydraulic and mechanical connecting rod type. Whether it is a kind of structure, finally is by connecting to the implementation of the full extension of mould. The process of connecting rod straight board and end plate is propped process, also is the tension stress were four pillars of the process.The size of the mould, can force from close tightly mode of hydraulic table rises high moments, mould, hydraulic power, high peak and the form of low conversely. A small injection mould with oil is at the table, according to the situation of mould to judge whether the straight fits tight. Really If a injection mould easily when connecting rod, and poor little straight to unbend, or a few connecting a deputy vice in incomplete unbend, injection mould will appear bulge, compactions will appear flash or other problems. 1.4.2.8 open mode controlWhen molten plastic injection into the mold cavity when, after the completion of cooling is open mode with action, remove products. Open mode process is divided into three stages. The first stage of slow, prevent parts in the mold cavity. The second stage of rapid, to shorten the time of mould. The third stage slowly open mold cavity, to reduce the impact of inertia and vibration.1.4.3 injection molding process conditionsAt present, the injection molding machine factory developed a variety of process control mode, roughly: injection speed control, injection pressure control, injection mold cavity plastic filling quantity control, screw back pressure and speed control of the state of refining etc. Realizing process control of product quality, the purpose of which is to improve the efficiency of machines to get maximum play.1.4.3.1 injection speed program controlThe program control injection velocity of the screw is injected into 3 4 stroke stage, at each stage of the use of appropriate injection velocity. Example: in the molten plastic started by runner injection velocity slows down when, in the process of filling mold filling injection, adopting high speed in slow at the end of the mould. Using this method, can prevent overflow, eliminating flow mark and reduce the residual stresses of the products.When filling mold flow speed, smooth, stable product size, low stress wave smaller, products and products to stress the uniformity (such as a polycarbonate parts with high carbon tetrachloride, immersion of injection molding, stamping have craze of low cracking). In the relatively slow filling mold conditions, material flow of temperature, especially after the gate, can help to avoid the temperature shrinkage and depression. But because of filling mold for a long time to continue to make parts appear statified and combining the weld 1ine, adverse effect not only, and mechanical strength, appearance is reduced greatly.High-speed injection, material flow speed, when high-speed filling mould smoothly, melting with cavity, temperature soon fall down too little, viscosity, can use lower injection pressure, is a hot filling mold. High-speed filling mold can improve the smoothness and gloss and eliminate the phenomenon and the joint line statified phenomenon, shrinkage sag, color uniform, most of the product can ensure plump. But easy to produce products fat bubbles or parts, even burn zoom, yellow or cause difficulty, or demoulding filling mold uneven phenomenon. For high viscosity plastic may lead to melt rupture, make product surface. CloudThe following conditions may consider using high pressure injection (1) plastic viscosity, cooling speed, long parts by low slow cannot completely filled every corner of the cavity, (2) wall thickness is too thin, expect the parts of thin-walled place easily condensation and retention, must adopt a high-speed injection, melting into energy consume immediately before the cavity, (3) using glass fiber reinforced plastic, or contains a large plastic, filling materials because of poor liquidity, in order to get the smooth and even parts, must adopt high pressure injection.For high precision products, stamping, thick wall thickness variation of large and thick tu margin and reinforcement of workpieces, had better use multilevel injection, such as secondary, tertiary, cet 4 or 5.1.4.3.2 injection pressure control programUsually the injection pressure control into an injection pressure, the second injection pressure (pressure) or above 3 times of the injection pressure control. Pressure switch time whether appropriate, to prevent the high pressure and prevent overflow or lack of material is very important. Mold pressure-keeping stage of hematocrit depends on the closed gate when melting temperature and pressure. If every time pressure switch to the products from the pressure and temperature of cooling stage, the products of hematocrit wont change. At constant temperature the molding, the most important decision goods size parameter is the pressure, the influence of dimensional tolerance of products is the most important variable is holding pressure and temper